HP DMI Tool NBDmiFit

[SKYSPB]

Re: HP DMI Tool NBDmiFit

Hello! There is an HP 608 G1 tablet. When loading, it writes: "Manufacture programming mode is in unlock". In the Readme files, it says that you need to use WinPE64 to create a bootable flash drive. Where can I download the file winpe64-2.12.zip? If you use a regular WinPE build, then wndmifit (2.10, 2.12, 2.13, 2.14) does not work. If you use the utility BiosConfigUtility64.exe then writes "System not supported". Please help me find it WinPE64-2.12.zip to create a bootable USB key. ps If you use https://docs.microsoft.com/en-us/win...pe--windows-pe Utilities also do not work. Thanks.

[asrafali]

Re: HP DMI Tool NBDmiFit

thank you sir

[falcon147]

Re: HP DMI Tool NBDmiFit

what version for HP 640G1 please i wanna solve {warning machine is not in committed state}
what can i do

[GGN]

Re: HP DMI Tool NBDmiFit

Hello!
I am trying to unlock the MPM on my Elitebook 840 G2 because I failed the initial branding after I changed the motherboard.
I tried the above method, and after I launch UefiMpmUnlock.efi in EFI shell, I receive the following message: HP MPM protocol is not present.
What do you guys think I am missing here?

I also tried to find a way to unlock the MPM via BIOS programming with no success. Could someone tell me how to find the byte controling MPM state in the BIOS?

Thanks!

[danandrei96]

Re: HP DMI Tool NBDmiFit

I already went through the whole thread before commenting. I tried the config tools from post #137 but they just return access denied and still the MPM is locked sadly

SOO.. in case anyone else is wondering, I actually managed to unlock the MPM by running UEFIMPMUNLOCK.EFI in nbdmifit 2.13 from the EFI shell. Even though the program says it's not supported on my system (2.14 would be the right version, but has no UEFI) . After MPM unlock I can use the normal tools nbdmifit or wndmifit to write the details

[danandrei96]

Re: HP DMI Tool NBDmiFit

See post #137 for some videos that will help .

I already went through the whole thread before commenting. I tried the config tools from post #137 but they just return access denied and still the MPM is locked sadly

[SMDFlea]

Re: HP DMI Tool NBDmiFit

Hi! Can someone help me with my HP bios please? Dump here https://www.badcaps.net/forum/showth...23#post1004223

See post #137 for some videos that will help .

[danandrei96]

Re: HP DMI Tool NBDmiFit

Hi! Can someone help me with my HP bios please? Dump here https://www.badcaps.net/forum/showth...23#post1004223

[dbone5000]

Re: HP DMI Tool NBDmiFit

Thanks you !
It had helped me to put back S/N and P/N for an unsupported old EliteBook 8460p with brand new system board got on eBay from a brocker.

What exactly did you do to make it work?

[theace8869]

Re: HP DMI Tool NBDmiFit

Also, some people have mentioned that you can boot in "UEFI mode". That said, the files within nbdmifit are .bat files, which typically do not run in a UEFI shell. Can someone elaborate on the proper procedure to boot a "UEFI USB"? I have been using Rufus to flash freedos, but this only boots in BIOS mode, and nbdmifit works here (and I'm assuming it's also unlocking MPM since it lets me change things), but I can't set a product name.

If you find something let me know as I really want to fix that issue.

[SMDFlea]

Re: HP DMI Tool NBDmiFit

Also, some people have mentioned that you can boot in "UEFI mode". That said, the files within nbdmifit are .bat files, which typically do not run in a UEFI shell. Can someone elaborate on the proper procedure to boot a "UEFI USB"? I have been using Rufus to flash freedos, but this only boots in BIOS mode, and nbdmifit works here (and I'm assuming it's also unlocking MPM since it lets me change things), but I can't set a product name.

The DMI tools include a pdf with the instructions on how to make a UEFI bootable key. Try hp BCU bios config utility as well. Also see post #137 in this thread,there`s a few youtube videos and an MPM tool that might help .

[backgammon]

Re: HP DMI Tool NBDmiFit

Also, some people have mentioned that you can boot in "UEFI mode". That said, the files within nbdmifit are .bat files, which typically do not run in a UEFI shell. Can someone elaborate on the proper procedure to boot a "UEFI USB"? I have been using Rufus to flash freedos, but this only boots in BIOS mode, and nbdmifit works here (and I'm assuming it's also unlocking MPM since it lets me change things), but I can't set a product name.

[backgammon]

Re: HP DMI Tool NBDmiFit

Still no luck with My HP Spectre X360 (13-4014TU) replacement motherboard. Can't unlock MPM to update product name in windmifit, NBDmifit doesn't contain product name. Means I still have a prompt every time I start the computer which is quite annoying. HP apparently aren't sending out smc.bin files due to security concerns. Really frustrating I think I'm going to have to live with the boot prompt...

[Supra2020]

Re: HP DMI Tool NBDmiFit

thanks!!!

[backgammon]

Re: HP DMI Tool NBDmiFit

I have the an HP Pavilion 17-f053us and replaced the motherboard and I used the the NBDmifit tool to fill in everything. The only thing that it ask now is "Product Name" and the NBDmifit tool i used via dos does not have an option for that. Is there something I missed or do I have to use something else to fill this in?

Been trying to "Set Product name" with different tools but I cant find any tool if any that lets you "Set Product Name".

Signed up to say that I have exactly the same issue. Everything else is fine, except for "Product Name".

[theace8869]

Re: HP DMI Tool NBDmiFit

Been trying to "Set Product name" with different tools but I cant find any tool if any that lets you "Set Product Name".

[theace8869]

Re: HP DMI Tool NBDmiFit

I have the an HP Pavilion 17-f053us and replaced the motherboard and I used the the NBDmifit tool to fill in everything. The only thing that it ask now is "Product Name" and the NBDmifit tool i used via dos does not have an option for that. Is there something I missed or do I have to use something else to fill this in?

[syairien]

Re: HP DMI Tool NBDmiFit

Sorry, does anyone support the all-in-one type 20-c414c cellphone, I tried them all but they couldn't

[xeniachile]

Re: HP DMI Tool NBDmiFit

somebody can extract Setup module or Setup PE32 for you, from the file
attached so you can generate IFR text file

is a bios insyde h20 F.2A Rev. A rev3.7

[Dodge101]

Re: HP DMI Tool NBDmiFit

If you want to lock and unlock MPM on some machines i suggest you goto this post

https://www.badcaps.net/forum/showpo...1&postcount=12

download Ver 2.13. Make a USB bootable pen drive. When you boot from the pen drive it automatically runs a program in UEFI mode that locks and unlocks the MPM.

I've used it on the following models that I've had repair:

HP Spectre Convertible - 1DL99EA#ABU
HP Notebook 15-bs507na
HP Pavilion X360 13-u009na
HP Laptop 15 15-bw029na