hi
need bios dump for my Toshiba C855D-S5340 pls
motherboard: Toshiba 6050A2509701-MB-A03
rgds.
need bios dump for my Toshiba C855D-S5340 pls
motherboard: Toshiba 6050A2509701-MB-A03
rgds.
-
The Samsung S49CG934SU monitor does not power on - no LED indicator activity and no response to power button. However, when 21V power is connected, it immediately draws 0.8A of current with no display output. The motherboard processor gets warm, and there is continuous reading activity from the W25Q128BV BIOS chip.
Suspected Cause:
I suspect the BIOS may have been corrupted during a power interruption while updating the firmware. The official website provides firmware updates, but they can only be installed via USB flash drive.
Troubleshooting Attempts:
... -
High great minds, please i need bios dump for this system .or help to REMOVE the PASSWORD in my original dump
Toshiba Dynabook T55/AB, PT55ABP-BJA2
MODEL NAME. Satellite L50-D series
P[ART NO PS57MN-00600R
Attached is my original bios dump ADMIN. PASSWORD LOCKED. Thank you in advance....09-26-2024, 04:30 AM -
Hello, I need to fix the BIOS dump or some other working one
Model: Toshiba Dynabook Satellite pro C5-E-104
SN: 70014063A
Motherboard: IP3_KN16R_MB_V20_200326A
Platform intel Core i5 8gen
Attached dump​...04-24-2025, 11:35 AM -
Hi, I have an MSI PRO B660M-G DDR4 board with damaged BIOS and i need a bios dump from a real board, along with MAC, UUID and Serial Number info (eg. a BIOS screenshot and pictures from the board stickers).
I need to reconstruct the bios on my board, based on another bios image form a real board - meaning a bios image containing MAC address, UUID and Serial number. A stock BIOS is not suffiecient, as it is impossible to discover where the MAC, UUID and SerialNumber are stored. Tried with a similar board, but there are too much differences, and the stock BIOS is missing a lot of...11-17-2023, 10:56 AM -
Hello,
I'm requesting a full BIOS dump (including EC firmware) for an HP OMEN 17-an012nf laptop.
Details:
Model : HP OMEN 17-an012nf
Motherboard Part Number : DAG3BAMBAF0 REV : F
Serial Number (S/N) : 5CD7280D51
BIOS chip : Winbond W25Q64VSIQ
Programmer : EZP2023+
Issue : The motherboard is not powering on. Only the 5V rail is present. The 3.3V rail is missing because EN1 on the SY8286B remains stuck at 0V. This signal is driven directly by the EC/SIO. I replaced the 3.3V regulator and confirmed it's working.
I already...