please fix this hp14 osamu2
thanks..
thanks..
-
-
Re: please fix this hp14 osamu2
chek if motherboard have the code attached on the rar file
well i will update in a while , dont know why but badcaps lately is dying on speed :\ its giving error all the time while uploading the bios . hold on some minutes and i'll try more later to upload it -
Re: please fix this hp14 osamu2
here it isComment
-
Re: please fix this hp14 osamu2
i told you chek if the board number matchs the bios
File Type: rar OSAMU2_CR_HPC MV_MBComment
-
Re: please fix this hp14 osamu2
try this , EC and mainComment
-
Re: please fix this hp14 osamu2
I think it's different again,
it's BID02191, at the end of bin fileComment
-
Re: please fix this hp14 osamu2
Send original file from computer, and send computer full modelComment
-
-
Re: please fix this hp14 osamu2
take this file and flash it
if it does not work, its not bios problem
serial fixedIm Back... sort of...
Comment
-
Re: please fix this hp14 osamu2
it's working, thanksComment
-
Re: please fix this hp14 osamu2
donald the man
Comment
-
Re: please fix this hp14 osamu2
hehe its easy once you know the info abot model and boardIm Back... sort of...Comment
-
Re: please fix this hp14 osamu2
Need bios hp345 g2..can somebody help me pleaseee....Comment
-
My T14's (NM-C801) main USBC input keeps failing every few months. Initially, it worked fine for several years. The symptom is that once powered from the main USBC port using a 65W power brick, after some time (minutes, hours) charging will fail completely. Powering from the secondary (docking) USBC input still works. This laptop is basically always plugged in. The first time it happened, it took me a long time to find that the FPF2281 over-voltage IC for that USBC input was at fault. When the issue occurs, it will continuously reset power delivery negotiations with the power brick -- according... -
For this Dick Smith TV GE6878 (Thompson) I replaced the broken remote with a universal it kinda works though if its more than a few meters away sometimes the buttons register and sometimes they wont so I bought another remote from another brand and it has the same problem, I've had an old TV in the past that the sensor died completely and I replaced it to fix it could this be a similar problem? I tried looking for a service manual, spare parts for a receiver and a parts list but I couldnt find any info. can someone please help me to find the info online for a service manual or where I can buy... -
hello anybody encountered this issue my board code is da0pafmb6j0 re j
I have tested a new ssd still not working i attached the old ssd to an enclosure and it is working i also updated the firmware to the latest version but still the device wont detect the ssd
Ihave checked the voltage 3v ssd is present
no history of liquid damage
anyone can give any advice badly need helpYesterday, 03:53 AM -
Hello, this is my first post and im just a beginner, so be easy on me guy. thanks
i have a LED chandeilier that switches colors from white to cool white to warm when toggling the switch, it has 24 LED arms, each arm is 30 CM length.
i have no datasheet at all for the LED lights, all i have is its length.
long story short, testing the chandelier on the ground, and it works fine for 1 - 2 - 6 hours, no problem.
as soon as i fix the chandelier to the ceiling and bury the driver inside the hub,... -
DA0G7GMB8F0
SN 5CD116WC7H
Product ID:2N1L0PA
Mo:14-DV0054TU
anyone have tested bios for this model...
Comment