Thank you very much Peste.
You're the man
-
Leave a comment:
-
BIOS for HP OMEN 16-c0161ax please
Hi ya folks,
I have a HP OMEN that stopped working after a cooler fan change.
Motherboard seems ok. I am assuming there's a BIOS issue.
Original BIOS backup attached.
HP OMEN 16-c0161ax
Serial Number 5CD215BDKJ
Motherboard markings
Model G3KR
DAG3KRMBCD0
REV D
Any Help is appreciated.
Thanks alot folks
-
Hello Community,
I recently tried to change the Batterie on my Omen by HP Laptop 17 an104ng and after putting in the new batterie ([Batterie Link](https://www.amazon.de/7xinbox-17-AN0...&keywords=16%2... -
Hi can some one help me plz
i have hp omen 17-cb0247ng (la h492p) it have bios problems and i flashed bios from usb the new one v53 and its boosting to bios but did not start to windows (blue screen of death) i tryed evry thig and not working
i flashed bios with programer ( CH341A )and it will not boost to bios just fan working no disply now i flash the orginal bios back its working but no booting to windows same problem
the bios from hp after extract have 4 bios file same size i tryed 4 of them not working
i have the orginal bios if some one can see what the problem or... -
Hello everyone,
I’m currently working on a dead MSI GP75 Leopard (MS-17E71) motherboard (i7 CPU, NVIDIA GPU) with a no display/no backlight issue initially. After extensive investigation, I’m at a critical stage involving EC firmware, BIOS/ME region interaction, and possible deep corruption. I'm seeking advanced insight from anyone with experience in EC/BIOS sync issues or PCH-level behavior. Here’s a full breakdown:
🧩 Initial Issue- Board powers on (fans spin, keyboard lights up and can be adjusted, caps lock led lights), but no display or backlight
- External display (HDMI) shows
07-24-2025, 02:17 PM -
Hi,
I have problem with my laptop. When I turn it on it do not POST. Black screen with FAN not working, When pressing CTRL+V/B I can go into BIOS update, but after auto restart there is no update screen. Nothing happen.
I have tried using this DUMP but with no go,
https://www.badcaps.net/forum/troubl...os#post3210916
My winbond BIOS chip got fried as well after 4th attempt, now it is unsoldered and I am waiting for... -
Here is the schematics for the HP Omen 16 (MODEL: G3KR / DAG3KRMBCD0 REV: D)...
Leave a comment: