please help fix bios for JPR50 LA-M794P REV 1.0 hp envy x360 15-fe******

[irfan karatela]

please help fix bios for JPR50 LA-M794P REV 1.0 2023-03-03 hp envy x360 15-fe0013dx

power on fan spins for a few seconds, has no display

thanks

[peste]

please help fix bios for JPR50 LA-M794P REV 1.0 2023-03-03 hp envy x360 15-fe0013dx

power on fan spins for a few seconds, has no display

thanks

post S/N, full name and model, motherboard model, product number,etc.

[irfan karatela]

full name : hp envy x360 2-in-1 Laptop
model : 15-fe0013dx
motherboard model : JPR50 LA-M794P REV 1.0
serial : CND34208GC
ProdID : 7H9Y2UA#ABA

[peste]

full name : hp envy x360 2-in-1 Laptop
model : 15-fe0013dx
motherboard model : JPR50 LA-M794P REV 1.0
serial : CND34208GC
ProdID : 7H9Y2UA#ABA

bios extracted from HP website update for HP Envy x360 2-in-1 Laptop 15-fe0013dx (7H9Y2UA)
DMI +KEYWIN 680000 - 68103F

[irfan karatela]

Thank you for this, but after flashing the bios & verifying the laptop is no longer initialising charging at 20v, rather its stuck at 5v. Prior to flashing the BIOS, the PD controller was negotiating and charging at 20v.

Please can you check the 1MB winbond 25Q80 dump of the TBT rom to see if its corrupted.

[HaiPa]

Hi guys,

Could someone help me with a repair on my bios, for the same laptop
On the original bios the laptop was only powering on for 1 second and caps blink ones and shut right down, I have downloaded the bios from thread #4 and the laptop is powering on and fully boots to windows.
The issues that I have now are that every time I start the laptop, on the first splash screen I do get a message with " Manufacture programing device in unlock mode" and was wondering if anyone could have a look at my bios dump and maybe fix it for me as I'm not that smart and capable to do it myself.

full name : hp envy x360 2-in-1 Laptop
model : 15-fe0019na
motherboard model : JPR50 LA-M794P REV 1.0
serial : CND4070WQG
ProdID : 8J268EA#ABU

Many thanks.

[peste]

Hi guys,

Could someone help me with a repair on my bios, for the same laptop
On the original bios the laptop was only powering on for 1 second and caps blink ones and shut right down, I have downloaded the bios from thread #4 and the laptop is powering on and fully boots to windows.
The issues that I have now are that every time I start the laptop, on the first splash screen I do get a message with " Manufacture programing device in unlock mode" and was wondering if anyone could have a look at my bios dump and maybe fix it for me as I'm not that smart and capable to do it myself.

full name : hp envy x360 2-in-1 Laptop
model : 15-fe0019na
motherboard model : JPR50 LA-M794P REV 1.0
serial : CND4070WQG
ProdID : 8J268EA#ABU

Many thanks.

the bios from post #4 is virgin, use the HxD program (it's free on the internet), enter both bios into the program (your laptop and the virgin one),
select that interval mentioned in both bios, copy the interval in your bios and pass it to the virgin bios (copy - paste)....and that's it...


that is if you still have the old bios...

[danito]

Hi guys,

Could someone help me with a repair on my bios, for the same laptop
On the original bios the laptop was only powering on for 1 second and caps blink ones and shut right down, I have downloaded the bios from thread #4 and the laptop is powering on and fully boots to windows.
The issues that I have now are that every time I start the laptop, on the first splash screen I do get a message with " Manufacture programing device in unlock mode" and was wondering if anyone could have a look at my bios dump and maybe fix it for me as I'm not that smart and capable to do it myself.

full name : hp envy x360 2-in-1 Laptop
model : 15-fe0019na
motherboard model : JPR50 LA-M794P REV 1.0
serial : CND4070WQG
ProdID : 8J268EA#ABU

Many thanks.

post the original bios of the laptop even if it is corrupted,

[HaiPa]

post the original bios of the laptop even if it is corrupted,

Hi,

It has been attached as a archive in the previous thread but will add it again.

Thanks colegu.

[HaiPa]

Hi,

It has been attached as a archive in the previous thread but will add it again.

Thanks colegu.

Sorry guys just seen my mistake, that was a different bios for a envy 15-fh, and will try to attach the proper one this time if someone with more brains than me can help.
I did try to use the HxD but that's how far I got, and got stuck and don't know how to select the right interval and copy over.

Many thanks.

[HaiPa]

Hi guys,

Could someone help me with a repair on my bios, for the same laptop
On the original bios the laptop was only powering on for 1 second and caps blink ones and shut right down, I have downloaded the bios from thread #4 and the laptop is powering on and fully boots to windows.
The issues that I have now are that every time I start the laptop, on the first splash screen I do get a message with " Manufacture programing device in unlock mode" and was wondering if anyone could have a look at my bios dump and maybe fix it for me as I'm not that smart and capable to do it myself.

full name : hp envy x360 2-in-1 Laptop
model : 15-fe0019na
motherboard model : JPR50 LA-M794P REV 1.0
serial : CND4070WQG
ProdID : 8J268EA#ABU

Many thanks.

Sorry guys just seen my mistake, that was a different bios for a envy 15-fh, and will try to attach the proper one this time if someone with more brains than me can help.
I did try to use the HxD but that's how far I got, and got stuck and don't know how to select the right interval and copy over.

Many thanks.

Hi guys, I'm still stuck with this if someone is willing to help with a correct solution for me, the bios from #4 is bringing my laptop on, but in windows at the laptop model is saying "insydeH2O Efi bios" and functions like touchscreen and touchpad are not recognized and working.

Many thanks.

[minhdigital]

Hi guys, I'm still stuck with this if someone is willing to help with a correct solution for me, the bios from #4 is bringing my laptop on, but in windows at the laptop model is saying "insydeH2O Efi bios" and functions like touchscreen and touchpad are not recognized and working.

Many thanks.

Send to you

[HaiPa]

Send to you

Thanks very much friend,

I did try it out, and now the laptop is not starting up at all, it just power on for 5 seconds with a blink on the caps button and nothing. Tried to write the old bios and is now not starting at all.

[Anselme]

i have a clean