I also have the same problem after flashing a BIOS. The original BIOS backup seems to be corrupt. What can happen if I flash this BIOS in my computer?
-
-
post S/N, full name and model, motherboard model, etc.Originally posted by mc4ren View Post
post the contents of the bios chip even if it is corrupted..you need an SPI programmer...here is a video for example..https://www.youtube.com/watch?v=DWWi...nnel=ThisIsHowDue to a lack of donations, server free space at a critical level, and possible closure of Bios Requests all donations are welcome, click:
>>>>> https://www.badcaps.net/index.php?pageid=donate1 <<<<<
Every donation made will go towards server fees and maintenance costs. -
With pleasure. Please find the details in the photos below. BIOS is also attached. Thanks!
X30-D-19X
PT272E-0EV038CE
S/N 6J075045H
(I also made another backup, but comparing with Notepad++, they were different, so not confident at all)Last edited by peste; 03-01-2025, 02:52 AM.Comment
-
Yes, I'm familiar with SPI programming (CH341A). Looking forward to your BIOS!Originally posted by peste View PostComment
-
Make another backup. Are you using a clip ? ,desolder if you can or solder wires, the clips are unreliable . What sofware are you using, i recommend NeoProgrammer and ASProgrammerOriginally posted by mc4ren View PostComment
-
I can't make another backup, as later I flashed a BIOS that was given to me supposedly to allow response code to challenge code (because my version was 4.1 and the challenge version is a long QR code with RSA-2048 signature). After that BIOS, the system doesn't boot up, only shows 2 amber, 2 white LEDs blinking.
I made three different backups prior to sending him, the one I attached here was the first backup. Which one do you need? The one that is loaded now is the one that I received from that guy (from vinafix). Do you want that one or one of my original backups?
I desoldered the BIOS chip and made the final programming in a separate board. But the original BIOS backup was made with clips...
I'm using this software:
Let me thank you for all your help, I'm open to paying you this contribution.Comment
-
-
You made my day! Thanks!
I don't know if you (SMDFlea and peste) are the same person, but you are worth a donation. Is there a way for it?Comment
-
Yes, at the top of the page it says Donate Crypto, buy you can donate via Paypal as well. You don`t have to donate anything, it`s all free here, but if you do it would be most welcome https://www.badcaps.net/donate/
-
-
I'm back with a very similar board, only that in this case it's a i7 instead of a i5. The laptop shows a constar white LED (the one of charging, I assume) and even if it turns on, the screen remains black without any signal.
Attached is the original BIOS which is version 4.1 and supposedly the new one that I flashed was for downgrading to an earlier version (without the QR challenge code).
Serial number: 1J166599H
Board model: Toshiba Portege X30-D FAURSY3 A4405A i7-7500UComment
-
-
You are so good, SMDFlea!Comment
Comment