HP Dragonfly 13.5 inch G4

[Raducosmin]

Can you help me with password remove please?
SN: 5CG3497HLQ
PRODUCT: 9C8X4EC

[hoaca388]

Can you help me with password remove please?
SN: 5CG3497HLQ
PRODUCT: 9C8X4EC

HP Dragonfly 13.5 inch G4 Notebook PC
CTNumber6MBMK0CTZIQ41A
Serial_5CG3497HLQ
Sku_9C8X4EC#ABU
Fearture byte_476J6S6b7B7H7M7R7W7m7saBaEapaqauawcAeMfPfXguhKhZj4jhk8mEmVn7nVngpDpVpWpnpqprqMqkqxqzr4.RD
Build Id_23WWSABZ602#SABU#DABU

[Raducosmin]

HP Dragonfly 13.5 inch G4 Notebook PC
CTNumber6MBMK0CTZIQ41A
Serial_5CG3497HLQ
Sku_9C8X4EC#ABU
Fearture byte_476J6S6b7B7H7M7R7W7m7saBaEapaqauawcAeMfPfXguhKhZj4jhk8mEmVn7nVngpDpVpWpnpqprqMqkqxqzr4.RD
Build Id_23WWSABZ602#SABU#DABU

IT WOKRS! THANK YOU VERY MUCH!

[MAREBELE]

SN: 5CG3160404
PRODUCT: 841W8AA#ABA


help me to modify the Bios after CPU Swap form i7 1365U to i7 1355U

[MAREBELE]

The EC on this is npcx998 The board doesn't turn on at the moment even after clean the me. I doesn't know how to clean the nvram, maybe that would help.

The replacment cpu is prom a known good motherboard so I can cross the possibilities off a bad donor

If possible please help me.

Thanks in advance

[SMDFlea]

The replacment cpu is prom a known good motherboard so I can cross the possibilities off a bad donor

From what make/model of motherboard did it come from.

[MAREBELE]

its from dell vostro 3530 / LA-M367P,

additional info:
The board is charging

[SMDFlea]

its from dell vostro 3530 / LA-M367P,

additional info:
The board is charging

The PCH has intel boot guard. You could only use that SOC as a donor for another dell

[MAREBELE]

i have a few other board but its all dell board,i also have HP and Lenovo but it i7 1360P not U,

does all dell PCH is boot guarded?,

and also is it not possible to dissable the boot guard thru bios modification?

[MAREBELE]

i got my hand on HP Elitebook G10 and swap The CPU from there after clean the me the board is turn on. Thanks for the support

[vik1100]

Hello everyone,

While desoldering the BIOS chip on motherboard [HP Dragonfly G4 , 5CG4425PBB], I might have accidentally removed a nearby SMD component.

I’m attaching close-up photos of the area.
Could anyone identify what part should be here (resistor, capacitor, diode, etc.) and its value?
Also, will the board boot without it, or is it critical?

Thank you in advance!

[vik1100]

I have an HP Dragonfly 13.5" G4 (SN 5CG4425PBB) which does not start.
Symptoms:
- When I press the power button, the screen stays black.
- The power LED blinks 7 times in a repeating cycle.
- No reaction on external display.
- Tried key combos (Win+B, Esc+F2) for BIOS recovery – no success.
- Full power reset (battery disconnected, power button 30 sec) – no effect.

What I suspect:
Looks like a corrupted BIOS.


Questions:
1. Does 7 blinks on Dragonfly G4 really mean BIOS failure, or could it be something else?
2. Does anyone have a clean BIOS dump for this model / same motherboard?

Any help or a working dump would be greatly appreciated.

[src8324]

Hi SIr , could you please unlock this bios for me?

[peste]

Hi SIr , could you please unlock this bios for me?

post the original contents of the bios chip..

post S/N, full name and model, motherboard model, .product number,etc.

[SMDFlea]

Hello everyone,

While desoldering the BIOS chip on motherboard [HP Dragonfly G4 , 5CG4425PBB], I might have accidentally removed a nearby SMD component.

I’m attaching close-up photos of the area.
Could anyone identify what part should be here (resistor, capacitor, diode, etc.) and its value?
Also, will the board boot without it, or is it critical?

Thank you in advance!

Damaged traces ?

[src8324]

post the original contents of the bios chip..

post S/N, full name and model, motherboard model, .product number,etc.

thanks for replying. Can you Please remove the admin password ?

product name: HP Dragonfly 13.5 inch G4 Notebook PC (91T60EC)

SN: 5CG4351DNC

[shiyab]

thanks for replying. Can you Please remove the admin password ?

product name: HP Dragonfly 13.5 inch G4 Notebook PC (91T60EC)

SN: 5CG4351DNC

hi try