ASUS zenbook 14 oled - UX3402Z

[ujhazi]

Hi there!

May I ask a working BIOS for this laptop:
ASUS Zenbook 14 oled UX3402Z
sn: n7n0Lp01x868284

I attached the original from the board.

Many thanks

[ujhazi]

Please

[SMDFlea]

Please

Post a picture of the white QR code near the speaker connector

[ujhazi]

Here is the content of it:
,N626NBLP000B3WMB,UX3402ZA,60NB0WC0-MB2310,200,

thanks

[pbls]

Also want to programm working BIOS with clear ME for this model - UX3402Z
Can someone help to upload this file here

[SMDFlea]

Also want to programm working BIOS with clear ME for this model - UX3402Z
Can someone help to upload this file here

Post your backup ,full laptop model number and serial number. Please type the serial number https://www.badcaps.net/forum/troubl...before-posting

[pbls]

- "Post your backup ,full laptop model number and serial number. Please type the serial number https://www.badcaps.net/forum/troubl...before-posting"
- Sorry fo my inattention, next time I'll be post serial in first message. Thanks a lot fo the answer to my question. But I think there are no reason to upload dump or backup because someone in previous repairing center programmed and soldered this IC with BIOS and right now there is a wrong version of BIOS I'm sure. Serial: N4N0LP00W77515E Model placed on the bottom cover - UX3402Z, Mainboard name - NB5936_MB_V3
Will it be enough to look for the BIOS?

[SMDFlea]

- "Post your backup ,full laptop model number and serial number. Please type the serial number https://www.badcaps.net/forum/troubl...before-posting"
- Sorry fo my inattention, next time I'll be post serial in first message. Thanks a lot fo the answer to my question. But I think there are no reason to upload dump or backup because someone in previous repairing center programmed and soldered this IC with BIOS and right now there is a wrong version of BIOS I'm sure. Serial: N4N0LP00W77515E Model placed on the bottom cover - UX3402Z, Mainboard name - NB5936_MB_V3
Will it be enough to look for the BIOS?

From your serial number i found your full laptop model number UX3402ZA-KM020W . Its the OLED version. There are different UX3402ZA bios updates at asus support. Post your backup anyway, as even if its the wrong one we might be able to rebuild it.

[pbls]

Hello again, SMDFlea! Nice to see a message from you. This is mine dump in attachment. And can you answer to me - Is there any risk to programm dump from another board to mine with Intel i5-1225(SPLD9)?
Can foreign dump damage my CPU if I didn't clear ME and TXE regions in foreign dump before programm it to the IC on the board?

[hoaca388]

Hello again, SMDFlea! Nice to see a message from you. This is mine dump in attachment. And can you answer to me - Is there any risk to programm dump from another board to mine with Intel i5-1225(SPLD9)?
Can foreign dump damage my CPU if I didn't clear ME and TXE regions in foreign dump before programm it to the IC on the board?

UX3402ZA

[pbls]

Thanks, hoaca388! Can you describe - your file in attachment is dump from another board with dirty ME and TXE or maybe another one?

[hoaca388]

Thanks, hoaca388! Can you describe - your file in attachment is dump from another board with dirty ME and TXE or maybe another one?

_ME from your original file and it has been cleaned.
_Bios region is downloaded from ASUS homepage according to your serial number.

[pbls]

Dear hoaca388, it sounds great. Thanks a lot! I will try and will post the result here.

[pbls]

UX3402ZA

After I programmed and soldered IC on the board - I received next messege on the laptops display - you can see it in the attachment.


I made all the steps from this instruction with or without battery with plugged AC Adapter, tried to use different flash drives with NTFS/exFAT partitions, but Asus Flash Utility didn/t start anyway. Where is the problem? Why laptop didn't start after BIOS programming?

[volinakis]

After I programmed and soldered IC on the board - I received next messege on the laptops display - you can see it in the attachment.


I made all the steps from this instruction with or without battery with plugged AC Adapter, tried to use different flash drives with NTFS/exFAT partitions, but Asus Flash Utility didn/t start anyway. Where is the problem? Why laptop didn't start after BIOS programming?

put on USB disk only UX3402ZAAS.310 file

[pbls]

put on USB disk only UX3402ZAAS.310 file

Already tried this way. in archive, without archive, tried different flash drives, with or without SSD on the board - no result, just the same message on the display every time.

[pbls]

UX3402ZA

In this file I didn't find my serial number N4N0LP00W77515E
Maybe problem is that one of BIOS regions isn't correct, because in my dump from the board I found the correct serial number

[pbls]

I used another BIOS and it's fully worked. Laptop is fully worked. Problem was resolved. Dear, hoaca388 in your file there is a mistake somewhere.

[pbls]

this one is working and tested.

[washington rander]

I have a notebook with a bios problem, if anyone can help me, I will attach a copy of the original bios files

brand: Asus

model:ux3402z

Serial number: 90nb0wc1-m012f0

nan0b6024407427

mdf: 2022-10

motherboard code
nb5936_mb_v3