Aorus 15G XC (GA-RX5LXC) no display - black screen

[cmn.fix]

Hello community! I am facing black screen / no display issues on an Aorus 15G XC with SN: SN20490J001020 , motherboard Gigabyte GA-RX5LXC Rev. 2. Did anyone encounter this issue and would you be able to help? I am attaching the 32mb bios dump. Thank you in advance!

[volinakis]

Hello community! I am facing black screen / no display issues on an Aorus 15G XC with SN: SN20490J001020 , motherboard Gigabyte GA-RX5LXC Rev. 2. Did anyone encounter this issue and would you be able to help? I am attaching the 32mb bios dump. Thank you in advance!

check again if your bios chipset is 256Mb, it should be 128Mb ... Take a picture of bios chipset and post it here if you are not sure.

[hoaca388]

Hello community! I am facing black screen / no display issues on an Aorus 15G XC with SN: SN20490J001020 , motherboard Gigabyte GA-RX5LXC Rev. 2. Did anyone encounter this issue and would you be able to help? I am attaching the 32mb bios dump. Thank you in advance!

AORUS 15G (Dòng RTX 30)

[hoaca388]

check again if your bios chipset is 256Mb, it should be 128Mb ... Take a picture of bios chipset and post it here if you are not sure.

Some laptops use 32MB chips but the bios only has 16MB.

[cmn.fix]

Some laptops use 32MB chips but the bios only has 16MB.

I have uploaded a picture just in case. I also tried the given dump and I get keyboard backlight, no image and no fan spin. Am I missing something or doing anything wrong?

[hoaca388]

I have uploaded a picture just in case. I also tried the given dump and I get keyboard backlight, no image and no fan spin. Am I missing something or doing anything wrong?

Replace the new bios chip and try again. If it doesn't work then you move on to hardware.

[cmn.fix]

Replace the new bios chip and try again. If it doesn't work then you move on to hardware.

Just realised while looking to order a new chip that I had actually selected the SOIC-8 version in the dropdown menu when autodetecting the chip. I have reprogrammed it now while having WSON-8 selected and I now get fan spin, keyboard backlight but still no display and reboots every 2 min.

[volinakis]

Just realised while looking to order a new chip that I had actually selected the SOIC-8 version in the dropdown menu when autodetecting the chip. I have reprogrammed it now while having WSON-8 selected and I now get fan spin, keyboard backlight but still no display and reboots every 2 min.

is no difference if you select soic8 or wson8, use AsProgrammer to write chipset and not default program came with CH341A. After write chipset content verify it.