Hello! Greetings, can someone help me check the BIOS backup programming of this laptop? I backed it up with NeoProgrammer, but when I transferred the code to the chip, the device's power LED turns on and then immediately turns off. The tragic thing is that it was working; I made a backup because I replaced a chip that was causing the battery not to be detected. I tested the device and it worked, the battery was detected. However, as a method I sometimes apply when working with devices with power issues, I erased the BIOS IC and reprogrammed it, but this time it failed. I downloaded the BIOS from HP, but none worked; some only emit a quick light on the screen and then turn off. Checking the power consumption, I noticed that once the chip was reprogrammed, it only drew 0.02 amps, whereas with others, it reached 0.09 amps. What did I do wrong? Thanks in advance, greetings.
HP Stream 14-ax113la
MB DA0P9MB26A0 Rev. A
SN# 5CD1495JDV
Celeron N4020
HP Stream 14-ax113la
MB DA0P9MB26A0 Rev. A
SN# 5CD1495JDV
Celeron N4020
Comment