Dear members,
I have an HP Elitebook 2540P laptop with mainboard: LA-5251P REV 1.0
It has a SIO with model: SMSC KBC1098
I think both the EC firmware and the main Bios reside in a single Bios chip.
Problem: KBC1098 is partially defective so that it does not generate ADP_En at Pin 75 and generates 8 amber blinks on the charging LED, indicating some wrong input.
Idea: Now I need to modify the EC firmware so that KBC1098 ignores the wrong input conditions and always generates a high ADP_En and does not enter a failure state.
Is it possible to modify the code of the EC firmware as described in my idea?
If so, how can I do that?
Thanks
Bios Chip Dump:
https://www.badcaps.net/filedata/fetch?id=1974054
I have an HP Elitebook 2540P laptop with mainboard: LA-5251P REV 1.0
It has a SIO with model: SMSC KBC1098
I think both the EC firmware and the main Bios reside in a single Bios chip.
Problem: KBC1098 is partially defective so that it does not generate ADP_En at Pin 75 and generates 8 amber blinks on the charging LED, indicating some wrong input.
Idea: Now I need to modify the EC firmware so that KBC1098 ignores the wrong input conditions and always generates a high ADP_En and does not enter a failure state.
Is it possible to modify the code of the EC firmware as described in my idea?
If so, how can I do that?
Thanks
Bios Chip Dump:
https://www.badcaps.net/filedata/fetch?id=1974054