Hey. i recently got my bios flashed from a repair shop on this laptop and now there is a long delay before it posts/ shows the boot screen. If someone could help me with this, it would be very much appreciated. Do let me know if I need to post any other details for it. the bios dump will be attached below.
-
-
QUOTE=Azy;n3237898]Hey. i recently got my bios flashed from a repair shop on this laptop and now there is a long delay before it posts/ shows the boot screen. If someone could help me with this, it would be very much appreciated. Do let me know if I need to post any other details for it. the bios dump will be attached below.[/QUOTE]
full name and model, S/N, etc...read...
https://www.badcaps.net/forum/troubl...before-posting
Last edited by peste; 03-18-2024, 11:20 AM.Due to a lack of donations, server free space at a critical level, and possible closure of Bios Requests all donations are welcome, click:
>>>>> https://www.badcaps.net/index.php?pageid=donate1 <<<<<
Every donation made will go towards server fees and maintenance costs. -
-
You're a legend. That fixed the problem. Boots up perfectly now. Thanks a lot!!!
Btw just curious, is it possible to change the boot image through the bios? These laptops are provided by the gov hence why it shows an advert for them while booting instead of the usual manufacturer logo.Comment
-
This might not be a very popular request, but for the past few weeks I've been looking into how i can change the bios boot image on my Haier Y11b 2in1. From what I've learned, the image is broken down into a hex pattern which is supposed to be pretty difficult to find in the bios file and replace with a custom one.
The laptop that im planning on making this change was provided by the government and therefore shows the governments ugly logos and all on the boot screen rather than the manufacturers (Haier) logo which has got pretty annoying over the years. If someone can help me with this, it would be very much appreciated. the dump for the bios and details of the laptop will be attached below for you to look into
Serial no:JB0C7000J00YAG2U1595
EC version: 38 (probably not required)
BIOS Vendor: American MegatrendsComment
-
A bit more browsing and finally found out how to change the boot logo. i followed this tutorial - How to Customize the Boot Splash Screen for AMI BIOS – Protectli Knowledge Base
For those interested, I'll be attaching the updated bios below with a preview of the new splash screen in the rar file as well. edited the bios provided above by peste so no need for Me cleaning either.Comment
-
Hello everyone,
I am requesting urgent assistance to unbrick my laptop, a rebranded TongFang GK7MRFR chassis. The laptop is completely dead following a faulty in-OS EC flash attempt.
I have successfully used a CH341A programmer and can read/write/verify both flash chips, but using my backups/extractions has failed to restore power. The root cause is likely a corrupted Intel Management Engine (ME) region or an incompatible EC/BIOS pairing. System & Hardware Details- Barebone / Chassis: TongFang GK7MRFR
- MB: MB: GK5MP5X V1.0 Prod :GK5MRFV10T04201310281
- Rebrand: PC Specialist
-
Hi everyone,
I’m working on a non-booting HP Envy x360 2-in-1 laptop and need verified firmware dumps for both the main BIOS and EC chip. I’ll be posting my own backups for reference and comparison.
🔍 System Details- Model: HP Envy x360 15-fe0053dx
- Product Number: 7HVO3UA#ABA
- Build ID: 23WW2GQZ6D
- Motherboard: JPR50 LA-M794P Rev: 1.0 (2023-03-03)
- Motherboard SPS: N30979-ABA
- LCD SPS: N49271-601
- Date Code: 172380
- Keyboard Type: 0
- Feature Byte:
3XeB7kN7.Ba.aqewkwBiBVuhcbdxYPgB
hZnp.praepq0Md4qkdf
🔧 Chip Info- Main BIOS chip: Winbond W25Q128JVSQ
-
Hi,
I kindly ask for help with Thinkpad BIOS/ME repair.
Thinkpad W541 board bought from Aliexpress, so I have no service tag nor S/N. It is 1GB version Q1 (K1100 nVidia GPU). BIOS 2.23, EC 1.13, ME 9.1.32.1002.
It worked fine until I tried to remove whitelist.
Steps taken:
- battery out, CMOS coin cell out, laptop disassembled; I kept LAN/USB subboard connected
- i took SPI programmer (CH341A with 3.3V mod) and SOIC clip and did a full backup of all SPI flash chips (SPI1 and SPI2 - BIOS, EC, ME, GbE; SPI3 - video BIOS; SPI4 - Thunderbolt fw) for several... -
Dear all,
I have a ASUS ZenBook UX480F with the following symptoms:
I suspect it is a BIOS issue. So I decided to try to clean the ME region. I followed the guide on win-raid, and I believe I have done everything correctly. My problem is: when I open the outimage.bin in ME Analyzer, it says that it is Extracted, and not Region, Extracted as it should be. Is it normal, or did I do something not correctly? This is my first experience editing BIOS files.
I would appreciate if someone could take time to explain the issue, so that I can learn. But I would... -
The Samsung S49CG934SU monitor does not power on - no LED indicator activity and no response to power button. However, when 21V power is connected, it immediately draws 0.8A of current with no display output. The motherboard processor gets warm, and there is continuous reading activity from the W25Q128BV BIOS chip.
Suspected Cause:
I suspect the BIOS may have been corrupted during a power interruption while updating the firmware. The official website provides firmware updates, but they can only be installed via USB flash drive.
Troubleshooting Attempts:
...
Comment