Microsoft Surface Pro 9 2083 Unlock Bios

[ahmypc]

Hi. I have a surface pro 9 2083 device with locked bios. Bios settings are disabled. I think DFCI is enabled. Can you help me solve the problem.Thanks.

[Vesko356]

Hi. I have a surface pro 9 2083 device with locked bios. Bios settings are disabled. I think DFCI is enabled. Can you help me solve the problem.Thanks.

Read the rules before posting
RULES UPDATE for BIOS requests/offers *AVOID BANNING, READ BEFORE POSTING*
https://www.badcaps.net/forum/troubl...before-posting

You MUST:

• Provide the full machine model number, serial number (or Service tag, SNID) and the board model number (see https://www.badcaps.net/forum/showthread.php?t=88758 ) ,The serial number, make, full model number, motherboard model and revision (except QR codes) must be written/typed at your request as per the rules. Not as a picture, part of the file name and so on.

[ahmypc]

Hi. I have a surface pro 9 2083 device with locked bios. Bios settings are disabled. I think DFCI is enabled. Can you help me solve the problem.Thanks.

Serial number : 0F0410J22383BF

[minhdigital]

Serial number : 0F0410J22383BF

Send to you, try

[ahmypc]

Send to you, try

My chip programmer only reads.(RT809F) I ordered a new programmer. I'll get back to you when I try it. Thank you.

[volinakis]

My chip programmer only reads.(RT809F) I ordered a new programmer. I'll get back to you when I try it. Thank you.

what???

[ahmypc]

what???

Pro 9 bios chip ID W25R256JW and although this programmer(RT809F) shows the chip ID incorrectly, it can read but cannot write. RT809H supports this chip.

[volinakis]

Pro 9 bios chip ID W25R256JW and although this programmer(RT809F) shows the chip ID incorrectly, it can read but cannot write. RT809H supports this chip.

if it's JW select 1.8V and W25Q256JW

[ahmypc]

if it's JW select 1.8V and W25Q256JW

It already shows it in automatic identification ( W25Q256JW), but it does not verify the data.

[minhdigital]

It already shows it in automatic identification ( W25Q256JW), but it does not verify the data.

You need soket rom 1.8V for it

[ahmypc]

You need soket rom 1.8V for it

I know. I've already studied with him.

[ahmypc]

Send to you, try

Unfortunately, the logo remained too

[minhdigital]

Unfortunately, the logo remained too

Try again

[ahmypc]

Try again

Thanks for your effort. The unlock_1.bin file worked unlocked but without the serial number and other private information.
The unlock_2.bin file worked but is still locked.
Can we add serial number to unlock_1 file?

[ahmypc]

Send to you, try

When I did Me Region Clean again it worked. thanks.

[wenl619]

Hello, can my friend upload your tested BIOS? Thank you very much

[ahmypc]

Hello, can my friend upload your tested BIOS? Thank you very much

Worked

[cgtec]

need clean ME region for my dump bios i uploade orginal dump

[SMDFlea]

serial number ? ? ? https://www.badcaps.net/forum/troubl...before-posting

[cgtec]

0F00G7D2333BF SERIAL NUMBER

[ahmypc]

There is dfci encryption in bios. I couldn't find a flash image tool program that could open the file. Can you help me remove the password?

Model: Surface pro 9 2083

Serial number:0F016EG23273BF