got this unit not turning on,nothing obvious on the motherboard,so i tried to make a clean and fresh firmware and ended up with:machine turning on,I have a chime but nothing on the screen.attached the original dump and the firmware created by F.I.T.would someone please help to make a working firmware with the original S.N.
-
-
Re: Macbook pro A1502 emc2835
hi;
can u test with HDMI port
probably u have backlight problem -
Re: Macbook pro A1502 emc2835
thanks for the suggestion but the smc reset did the trick.It works now.
Comment
-
Apple A1502 EMC2835 BIOS
Working but it has a efi passwordComment
-
need bios for macbook pro 13" 2015 early
hi all, i couldn't find anywhere.
i need somebody to remove this password in that bios. pls
motherboard code C02638401LHGDVQ1Q 2.7 EP1866 8G SI
model number A1502 EMC 2838
thank you in advanceComment
-
Re: need bios for macbook pro 13" 2015 early
Is that the right EMC number ?
Post the required serial number !
RULES UPDATE for BIOS requests/offers *AVOID BANNING, READ BEFORE POSTING*
https://www.badcaps.net/forum/showthread.php?t=103570
.Comment
-
Due to a lack of donations, server free space at a critical level, and possible closure of Bios Requests all donations are welcome, click:
>>>>> https://www.badcaps.net/index.php?pageid=donate1 <<<<<
Every donation made will go towards server fees and maintenance costs.Comment
-
Re: need bios for macbook pro 13" 2015 early
hi, the serial number of the macbook is C17SG3HPFVH3, i hope this will help mate
thank youComment
-
Due to a lack of donations, server free space at a critical level, and possible closure of Bios Requests all donations are welcome, click:
>>>>> https://www.badcaps.net/index.php?pageid=donate1 <<<<<
Every donation made will go towards server fees and maintenance costs.Comment
-
Hi all,
This is my first post here (I am very new to forums!) and I hope someone can help. I am looking for a full dump of the BIOS of a HP Proliant Microserver Gen 8 so that I can get this mini server running again. (BIOS version J06 2019-04-04, chip 25Q064A). I think my board was partially bricked after a failed BIOS update.
I got it second hand in this state and all the normal attempts at bios restoration have not worked. I have even desoldered the chip and tried to load the actual BIOS from HP, but it is missing some parts needed to boot the system.
I... -
Apple MacBook Air 13" Early 2015 Service Guide...10-15-2024, 02:06 AM
-
Hello everyone,
I recently bought a non-working Asus Zenbook Pro Duo OLED UX8402ZA that was listed for parts only. The seller mentioned that it had no display output but that the charging lights worked.
When the laptop arrived (without a charger and SSD), I connected a charger and confirmed with a multimeter that it was charging the battery. However, when I tried to power it on, only the backlight of the secondary display came on. There was no image, and it didn’t boot into the BIOS.
I decided to try flashing a new BIOS, but since I didn’t want to desolder... -
First of all thanks to all of our members who have posted previously all methods posted here.
Please leave a comment if you find something new,or have anything else to add.
-----------------------------------------------------------------------------------------
Find by serial number,model number or series
If you know the laptop serial or model number go to HP support https://support.hp.com/us-en/drivers/laptops .
Enter the serial number or model number and click submit.On the next screen you will have to enter the OS
Operating system and OS version.If... -
Hello,
I am not sure if someone can help me with this or not. I am hoping someone can.
I have a client who brought me a Foscam C1 V2 IP Camera after they disconnected power to the device during the middle of a firmware upgrade because they got impatient and thought it was frozen, so they disconnected the power despite a warning message telling them not to do that. Currently the device shows the power LED when connected to power, but it doesn't complete it's boot process and the camera is inaccessible on the network through Foscam's App for Android or the Windows application....11-12-2025, 10:23 AM
Comment