Hello friends, I have a gk7mr0r v1.2 10L motherboard, monster tulpar t7 v20.2, but it looks the same as the tongfang gk7mr0r v1.2 10L motherboard. Does anyone have a bios?
-
-
Re: Gk7mr0r v1.2 10l bİos need
Post the serial number,and your backup(s) -> https://www.badcaps.net/forum/showthread.php?t=103570
. -
Re: Gk7mr0r v1.2 10l bİos need
hello
serial number
GK7MR0R2204402539Comment
-
Comment
-
try thisComment
-
HI This worked for me, I just want to know if you know the address of the DMI to edit it so I have my serial number and everything else I made a post about my problem but no one contributed
https://www.badcaps.net/forum/troubl...-avell-a62-livComment
-
Due to a lack of donations, server free space at a critical level, and possible closure of Bios Requests all donations are welcome, click:
>>>>> https://www.badcaps.net/index.php?pageid=donate1 <<<<<
Every donation made will go towards server fees and maintenance costs.Comment
-
merhaba
Monster tulpar t5 v19.2
seri no:GK5MR0V2202904029
gk7mr0r v1 .1
I need bios mastersComment
-
I need help with a bios for the above machine - Ryzen 7 14". I get fan spin, keyboard lights up and sometimes the screen works but is usually a black screen.
PC Specialist - P/N PC1-1847447
S/N 1847447001
Board number: MBPPF4NU18-FN10... -
Hello everyone.
I have a GK7MR0R (XMG Core 17) The device does not start. When I press the power button, the device tries to start and draws 0.8A for a second. According to the schematic, the following voltages should be present in the connected power supply unit and these are also present:
+5VALW
+3VALW
+3VALW_PCH
+1.8V_PRIM
+1.05VO_OUT_FET
The battery is being charged.
First I tried to rewrite the BIOS, same behavior.
Another user had the same behavior and his chipset was defective. I also changed the chipset, same behavior.
... -
Hello, would anyone have the schematics and/or board view for the Tongfang GM5TG0O (aka XMG Core 15 M21, Avell A70 MOB, Mechrevo Z3 Pro, among others) or a similar model?
I'm trying to debug an issue with the webcam module. Actual camera module and eDP cable both replaced already, but issue persists (glitched image, faint LED indicator, perhaps a power issue?). Having the schematics and/or board view would help a lot... -
Hello, does anyone have the wiring diagram for the Tongfang GX4HRXL?
Thanks in advance!
Best regards
cyb3rj05-09-2025, 05:20 AM -
I need Monster Tulpar V20.3 Clean Me Bios.
The srkma chip was replaced, I tried to do a clean me but I didn't get any results, it opens late.
Can you do a clean me for my original bios, thank you.
GM5TG0O222100999
MNS220330000307...04-21-2025, 07:12 AM
Comment