Originally posted by Dangvantu
View Post
Announcement
Collapse
No announcement yet.
inspiron 7306 2n1 HELLCAT 13 TGL MB
Collapse
X
-
Hello,
I have replaced the damaged USB-C connector and repaired the pads /the broken socket from the board and broken solder pads of the connector in the board/. On the original bios laptop does not boot after repair. Connecting the charger, the power light comes on momentarily and goes out, no response to the Power button. I checked few bioses but did not find a suitable one. On the bios i found in another topic the laptop starts up, charges the battery, runs the fan and works stably, however, I have a problem with entering the service tag because it has been cleared. When I try to add service tag and save bios data, it is not remembered. After booting laptop gives the message Manufactoring mode active appears , Warning: The Service Tag has not been programmed.... The bios I found was version 1.22 so I did an update to actual 1.31 thinking that after update the Service Tag would be saved but the situation repeats.
On the original bios laptop is not responding except for lighting the Power light for a while. I check on the USB-C power adapter I can't give the power consumption data because I have no way to read it.
I would ask forumers to fix the read bios before repairing it, which is definitely damaged. Files read from the board attached,
He gives the data of the laptop:
Dell Inspiron 7306
Board HELLCAT 13 TGL MB 19827-1
CPU: I5-1135G7
GPU: UMA
BIOS: BIOS1-WINBOND W25Q64JVSIQ (8MB), BIOS2-MXIC MX25L12872F (16MB)
KBC: MEC1515-NB
ST:CDFGX93 /read from laptop case/.
Thank you in advance for your help.Attached Files
Comment
-
Originally posted by yavor View PostHello,
Need some help with Dell Inspiron 7306 2in1, after replacing MEC1515-NB because of short can't program the Service Tag.
motherboard number HELLCAT 13 TGL ME 19827-1
Service tag: H74DS93
The file named "1 -- 1 System BIOS with BiosGuard v1.32.0.bin" is a 16MB bios region, flash that to the 16MB chip, then you should be able to enter a new service tag.
Comment
-
Originally posted by Munbi1215@gmail.com View Posti need fix bios
no display
sv : CL5W9G3
ex : 27401081043
Service Tag: CL5W9G3
----------------------------------------------------------------------------------------------------------------------------------------------------------
All donations to Badcaps are welcome.
Become a Badcaps supporter
>>>>> click on this link to donate <<<<<
Thanks to all supporters.
----------------------------------------------------------------------------------------------------------------------------------------------------------
Comment
-
Please help me with the BIOS of this PC
At first, the problem was that it turned on with the fan at top speed, the capslock stays on. no display nothing else.
I downloaded a new firmware with the service tag from dell and extracted it pfs extractor, flashed the 16mb file on the 16mb chip, the behaviour remain the same with additional of piano tone when the keyboard is pressed. Additionally, the plug in indicator flashed 2 amber 7 white
I used the both firmware on the first page, where a person complained about missing service tag, the behaviour remains the same too.
please help me.
service tag: HX6Q563Attached Files
Comment
-
Originally posted by Zilicon View PostPlease help me with the BIOS of this PC
At first, the problem was that it turned on with the fan at top speed, the capslock stays on. no display nothing else.
I downloaded a new firmware with the service tag from dell and extracted it pfs extractor, flashed the 16mb file on the 16mb chip, the behaviour remain the same with additional of piano tone when the keyboard is pressed. Additionally, the plug in indicator flashed 2 amber 7 white
I used the both firmware on the first page, where a person complained about missing service tag, the behaviour remains the same too.
please help me.
service tag: HX6Q563
Comment
Comment