s145 141GM Bios firmware

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • JUANLUNA
    New Member
    • Feb 2023
    • 5
    • Philippines

    #1

    s145 141GM Bios firmware

    Hi every one genius out there,
    Can you help me find a compatible firmware of my bios,
    my laptop model is ideapad s145 141GM
    BIOS model: WINBOND 25Q64FWSIQ
    thank you very much,
    Attached Files

    if you find these attachements useful please consider making a small donation to the site

  • qayyum786
    Badcaps Legend
    • Aug 2018
    • 1959
    • INDIA

    #2
    Re: s145 141GM Bios firmware

    Originally posted by juanluna
    hi every one genius out there,
    can you help me find a compatible firmware of my bios,
    my laptop model is ideapad s145 141gm
    bios model: Winbond 25q64fwsiq
    thank you very much,
    post your backup bios here

    Comment

    Related Topics

    Collapse

    • joven016
      Lenovo Ideapad S145 need working bios HELP!!
      by joven016
      Problem is blinking power led only
      i don't know exactly if it's s145-15igm or s145-14igm
      have a backup bios file but i dont know the serial.. coz text already erased at the back of the cover
      Mother board : fs440fs541 nm-c111 rev 1.0 2019-01-08

      Already tested some of posted bios here
      S145-14igm - success but invalid serial and not booting on OS
      S145-15igm - success with serial and some other info in bios but still not booting on OS
      already tried installing new windows but always booting on bios setup
      windows installer flash drive detected on...
      08-21-2025, 10:55 PM
    • Ahari
      Request HP Proliant Microserver Gen 8 (J06) BIOS dump to restore system firmware
      by Ahari
      Hi all,

      This is my first post here (I am very new to forums!) and I hope someone can help. I am looking for a full dump of the BIOS of a HP Proliant Microserver Gen 8 so that I can get this mini server running again. (BIOS version J06 2019-04-04, chip 25Q064A). I think my board was partially bricked after a failed BIOS update.

      I got it second hand in this state and all the normal attempts at bios restoration have not worked. I have even desoldered the chip and tried to load the actual BIOS from HP, but it is missing some parts needed to boot the system.

      I...
      08-13-2025, 06:12 AM
    • pirati
      ASUS Zenbook Pro Duo UX8402ZA BIOS
      by pirati
      Hello everyone,

      I recently bought a non-working Asus Zenbook Pro Duo OLED UX8402ZA that was listed for parts only. The seller mentioned that it had no display output but that the charging lights worked.

      When the laptop arrived (without a charger and SSD), I connected a charger and confirmed with a multimeter that it was charging the battery. However, when I tried to power it on, only the backlight of the secondary display came on. There was no image, and it didn’t boot into the BIOS.

      I decided to try flashing a new BIOS, but since I didn’t want to desolder...
      10-27-2025, 04:20 PM
    • Vesko356
      [Guide] How to find the right HP bios version to flash
      by Vesko356
      First of all thanks to all of our members who have posted previously all methods posted here.
      Please leave a comment if you find something new,or have anything else to add.
      -----------------------------------------------------------------------------------------

      Find by serial number,model number or series

      If you know the laptop serial or model number go to HP support https://support.hp.com/us-en/drivers/laptops .
      Enter the serial number or model number and click submit.On the next screen you will have to enter the OS
      Operating system and OS version.If...
      08-11-2023, 03:27 AM
    • grimacelord
      Foscam C1 V2 IP Camera BIOS/Firmware Help
      by grimacelord
      Hello,

      I am not sure if someone can help me with this or not. I am hoping someone can.

      I have a client who brought me a Foscam C1 V2 IP Camera after they disconnected power to the device during the middle of a firmware upgrade because they got impatient and thought it was frozen, so they disconnected the power despite a warning message telling them not to do that. Currently the device shows the power LED when connected to power, but it doesn't complete it's boot process and the camera is inaccessible on the network through Foscam's App for Android or the Windows application....
      11-12-2025, 10:23 AM
    • Loading...
    • No more items.
    Working...