Announcement

Collapse
No announcement yet.

LENOVO Thinkpad L14 Gen 2 HL4A0 HL5A0 NM-D271 REV 1.0

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • hoaca388
    replied
    Originally posted by etronico2006 View Post
    Could you pease build this bios?
    Lenovo l14 gen 2
    sn pf-30s98d
    type 20x2s1sy00
    L14 Gen 2 Laptops (ThinkPad) - Type 20X2

    Attached Files

    Leave a comment:


  • etronico2006
    replied
    Could you pease build this bios?
    Lenovo l14 gen 2
    sn pf-30s98d
    type 20x2s1sy00
    Attached Files

    Leave a comment:


  • SMDFlea
    replied
    Originally posted by trufoldino157 View Post
    Hello
    Can you help me remove the password please

    Motherboard HL4A0/HL5A0 NM-D271
    Type 20X1
    Lenovo L14 Gen 2
    S/N PF43Q37Q
    NUVOTON NPCE68BPA0DX
    File size should be 384KB

    Leave a comment:


  • trufoldino157
    replied
    Hello
    Can you help me remove the password please

    Motherboard HL4A0/HL5A0 NM-D271
    Type 20X1
    Lenovo L14 Gen 2
    S/N PF43Q37Q
    NUVOTON NPCE68BPA0DX
    Attached Files

    Leave a comment:


  • hoaca388
    replied
    Originally posted by Andromedus_81 View Post
    Hello
    Can you help me remove the password please

    Motherboard HL4A0/HL5A0 NM-D271
    Type 20X1-3526ze
    Lenovo L14 Gen 2
    S/N PF-3526ZE
    NUVOTON NPCE68BPA0DX
    TRY
    Attached Files

    Leave a comment:


  • Andromedus_81
    replied
    Hello
    Can you help me remove the password please

    Motherboard HL4A0/HL5A0 NM-D271
    Type 20X1-3526ze
    Lenovo L14 Gen 2
    S/N PF-3526ZE
    NUVOTON NPCE68BPA0DX
    Attached Files

    Leave a comment:


  • Andromedus_81
    replied
    Do I need config motherboard pin fot this chip?
    Attached Files

    Leave a comment:


  • Andromedus_81
    replied
    Hello

    It reads the input for about 10 minutes, but there is no data in the file, only the values 1 and F. Can anyone help with how to solve this please?
    Lenovo L14 Gen 2
    S/N PF-3526ZE
    NUVOTON NPCE68BPA0DX
    Attached Files

    Leave a comment:


  • peste
    commented on 's reply
    post merged..next time look for a thread with the name and model, motherboard model of the laptop, and post there, if you can't find it, then make a new thread..

  • Andromedus_81
    replied
    S/N PF-3526ZE
    Model Lenovo L14 Gen 2
    Type 20X1-0042UK
    Motherboard HL4A0/HL5A0 NM-D271

    Leave a comment:


  • peste
    replied
    Originally posted by Andromedus_81 View Post
    Hello
    I have a problem reading the KBC using the SVOD 4 programmer. I have a Lenovo L14 laptop, S/N PF3526ZE, with a password in the BIOS. In the set, I can't find a matching wide ribbon cable to connect the motherboard to the keyboard. Can I use a narrower ribbon cable for reading? Can anyone suggest how to configure the programmer for reading and which ribbon cable to use please
    post S/N, full name and model, motherboard model, TYPE,etc.

    Leave a comment:


  • Andromedus_81
    replied
    Hello
    I have a problem reading the KBC using the SVOD 4 programmer. I have a Lenovo L14 laptop, S/N PF3526ZE, with a password in the BIOS. In the set, I can't find a matching wide ribbon cable to connect the motherboard to the keyboard. Can I use a narrower ribbon cable for reading? Can anyone suggest how to configure the programmer for reading and which ribbon cable to use please

    Leave a comment:


  • kopychev
    replied
    помогите собрать дамп bios, ноутбук заряжается, но нет включения, при подключении зарядного устройства 3 раза мигает индикатор кнопки включения, больше нет никакой реакции. Thinpad l14 Gen2 серийный номер PF-3TPJYF

    In english !

    help to collect bios dump, laptop charges, but does not turn on, when connecting the charger, the power button indicator blinks 3 times, no more reaction. Thinpad l14 Gen2 serial number PF-3TPJYF

    Attached Files
    Last edited by SMDFlea; 04-05-2025, 09:05 AM. Reason: english

    Leave a comment:


  • peste
    commented on 's reply
    post merged..next time look for a thread with the name and model, motherboard model of the laptop, and post there, if you can't find it, then make a new thread..

  • askor786
    replied
    Hi All,

    I'm extremely new to this and I've probably spent the last 8 hours reading a whole lot of stuff.
    I've read through the BIOS guides and posts linked.
    I am a noob to this so please if someone can guide me.

    I have a few laptops I've bought from auction; 5 of them had supervisor locks on them. They are all 10th/11th Gen 2021+ Lenovo's. Ranging from P14s Gen 1/2/3 and L14 Gen 2/3.

    Lets start off with just one for simplicity and ill figure out what to do with the rest.

    ThinkpadL14 GEN 2
    Serial Number:PF-389GKJ
    TYPE Number: 20X1-003VUK
    11th Gen Intel Core i7-1165G7
    BIOS VERSION R1JET53W

    How do I do this? From my understanding, I need a SVOD4(Can use other tools) to read the dump and then write a patched/cleaned version back on? Some posts are stating you can read it and just write the same file back. Some are saying it needs to be cleaned. some places say it needs to be JTagged.

    Can someone just explain the exact tools I need to buy first, then once I extract the bin file what I need to do with it? If it needs to be cleaned/Cleared, can someone show me how this is done? I just need a noob friendly guide.

    Thank you in advance!

    Leave a comment:


  • abuge
    replied
    please remove absolute computrace from Lenovo l14 gen 2
    serial PF3VF8EQ old bios attached
    Attached Files

    Leave a comment:


  • Stefan Steff
    replied
    Originally posted by Mahesa09 View Post
    save the file ori tested ok worked
    Try this content
    Attached Files

    Leave a comment:


  • Mahesa09
    replied
    save the file ori tested ok worked
    Attached Files

    Leave a comment:


  • Mahesa09
    replied
    Originally posted by Maxpower3 View Post
    Cliquez sur l'image pour la voir en taille r?elleà Nom : 		image.pngà Affichages :	0à Taille :		539,1 Koà ID : 			3323677
    I forgot to clean 1A1A at 5C420, twice in the file​ another 5D420

    I can read ec with svod4. Can you help me detail how to remove password from ec file so that svp error does not appear. I tried all these files but svp error appears

    Leave a comment:


  • Mahesa09
    replied
    Originally posted by Stefan Steff View Post
    Try this BIOS, should work with it...
    hy bro, Do you have a solution for reading the EC, I can read it but the result is just blank

    Leave a comment:

Working...
X