Hp x2 210 g2 pc

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • tooko
    Member
    • Nov 2014
    • 38
    • france
    #1

    Hp x2 210 g2 pc

    Hi,

    I need to remove the BIOS password from this HP x2 210 G2. Do I need to dump the BIOS EEPROM or does a keygen exist for this one ?



    After 3 wrong codes I get " System Disabled A [C76543EB]

    each time I reboot the laptop, I get another code !

    Thanks
    Best regards
    Last edited by tooko; 01-16-2023, 07:37 PM.
    Tags: None
    • tooko
      Member
      • Nov 2014
      • 38
      • france
      #2
      Re: Hp x2 210 g2 pc

      Hi,

      I googlized it then I found the solution:https://bios-pw.org/ generates a password then I unlocked it.

      Thank you Badcaps members
      Best regards

        Comment

        Previous template Next

        Related Topics

        Collapse
        • spice_disc
          Vizio TV M50-C1 reboot cycle and static on screen
          by spice_disc
          I'm currently trying to diagnose and fix my Vizio TV (Model M50-C1). I've tried a number of different basic solutions, but I'm trying to determine if my issue is currently a failing panel, T-Con board, or main board (or something else entirely) and whether or not it is worth my time to fix it. Details of the issue and what I've tried are below as well as why I think it is either a bad panel, T-Con board, or main board.

          The Issue: The TV will be on and working fine but after the TV is on for ~5-10 minutes the screen will freeze (with sound continuing) until the TV reboots itself. While...
          1 Photo
          09-08-2024, 02:37 PM
        • gretti
          MSI Z370-A Pro, works but does not power off or reboot and USB issues
          by gretti
          I have a MSI Z370-A Pro. The board does not reboot or shut down from the Windows recovery console. USB communications stop and the status light on USB 1 stays on and does not blink. I have programmed a new BIOS with a CH341A programmer already, swapped RAM, PSU, CPU. The board will power off when the power button is held and resets when the reset switch is pressed, but it will not react to the reset switch if already told by software to shut down or restart. The board will reboot from BIOS after a save and exit command.

          The MSI BIOS included the ME firmware for the board. The size...
          10-16-2025, 02:14 AM
        • hotgly
          Surface Pro 9, i5 version, lost touch on screen after upgrading hard drive, and ISH Power State shows Disabled
          by hotgly
          After upgrading the factory 128Gb SSD to a 512Gb WD_Black SN770M, this surface pro lost touch on screen, no touch in windows or in UEFI.
          The Human Interface Devices did find touch and stylus but it shows Disabled in windows device manager.
          I am not sure if this is a bios problem or hardware problem, already tried reinstall and reset from windows, not working. And now trying to clean/reset the bios.

          Computer model is: Surface Pro 9, i5, 8GB memory, 128GB
          Serial number: 0F00S2Y22353BF

          Intel(R) ME Code Versions:
          BIOS Version 12.200.143
          MEI Driver...
          05-15-2024, 02:20 PM
        • spawnx212484
          Lenovo V15 G2 ITL ME DISABLED
          by spawnx212484
          Hello,

          I have a Lenovo V15 G2 ITL with the memory onboard defective... I disabled the memory in the bios via a utility on the forum and since impossible to detect the SSD NVME in the Bios...

          I've updated the Bios and EC but nothing changes... I thought of updating the ME frimware via Windows and I have a Log with the message ME Disabled...

          I don't know what to do, should I do a ME clean?


          Thanks​
          04-01-2024, 11:21 AM
        • kevin_allein
          Samsung GU58TU7199 reboot loop
          by kevin_allein
          Hi, I have two identical Samsung GU58TU7199, which both had the reboot loop. On that model TCON is integrated into the motherboard and there is only one FPC cable, which goes to a driver board driving half of the panel (left side seen from the rear of the TV) and than another FPC cable connecting left side to the right side.

          The first one was easy, once I disconnected the FPC between left and right the TV did start up. I soldered a bridge on the motherboard on the test points as found here in the forum or on Youtube and half of the screen was coming up. I than tried the CK1..8 lines...
          03-24-2024, 12:19 PM
        • Loading...
        • No more items.
        Working...