I have LENOVO Ideapad 3-14IIL05 model:81WD it doesnt display,,but power light on,i have tried flashing a clean bios but still the same problem...please help me give me any idea.
LENOVO Ideapad 3-14IIL05 no display even after bios flash
Collapse
X
-
Re: LENOVO Ideapad 3-14IIL05 no display even after bios flash
How much time do you give it after pressing the power button?
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Mọi khoản quyên góp cho badcaps đều được hoan nghênh, hãy nhấp vào liên kết này để quyên góp. Cảm ơn tất cả những người ủng hộ---------------------------------------------------------------------------------------------------------------------------------------------------------------- -
Re: LENOVO Ideapad 3-14IIL05 no display even after bios flash
You have given us all the measurements.So its our fault we couldnt help you.Comment
-
Re: LENOVO Ideapad 3-14IIL05 no display even after bios flash
i have same problem... but in my case all voltage is present and my laptop read 0.498 amperes but no display no capslock i already flash the bios but same issue no display no capslock 0.498 ampersComment
-
Re: LENOVO Ideapad 3-14IIL05 no display even after bios flash
Check DC/DC section then check if voltage is available on all coils.Comment
Related Topics
Collapse
-
by abhorsenHey guys,
Hope you all are doing well. I come here from Win-Raid because I am having issues disabling Flash Protection Range Registers so I can flash my BIOS from within Windows using Intel's IFW tool/using flashrom within Linux, however I cannot due to the above mentioned error.
Here is my thread on Win-Raid detailing the whole process I went through: https://winraid.level1techs.com/t/re...h-gen/95478/27
Essentially I managed to boot into Windows while shorting PINs 1+5 of my audio chip to disable the HAP bit...-
Channel: BIOS & Schematic Requests!
-
-
by Vesko356First of all thanks to all of our members who have posted previously all methods posted here.
Please leave a comment if you find something new,or have anything else to add.
-----------------------------------------------------------------------------------------
Find by serial number,model number or series
If you know the laptop serial or model number go to HP support https://support.hp.com/us-en/drivers/laptops .
Enter the serial number or model number and click submit.On the next screen you will have to enter the OS
Operating system and OS version.If...-
Channel: BIOS Requests ONLY!
-
-
by HotSaladMan*##*#*#*#*#*#Cringe Warning Used Clips for Tl866ii Plus Backups#*#*#*#*#*#
Model : Lenovo ThinkBook 14S Yoga ITL
S/N : MP28JT19
MFG Date : 2022/02/09
Factory ID PRC4
MO : MPNXB26080FX
MTM : 20WE001US
MODULE FCC ID : PD9AX201NG
IC : 1000M-AX201NG
BOARD INFO
FLV34 LA-KO51P
REV : 1B 2020-08-24
Bit of Info
Using Tl866ii Plus, it would scan the chip but wouldn't not detect the
chip id, so i would always uncheck the id check, so it would bypass the error
i did in fact make...-
Channel: BIOS Requests ONLY!
-
-
Hello!
A few days ago I bricked my Lenovo x1 nano gen 1 while updating the bios/fw from linux.
No the machine power up, but it stuck in a recovery state and I can not do much.
Lenovo X1 Nano Gen 1
Type: 20UN - X021US
S/N: R9 - 10W2D9
I would like to flash a new BIOS/FW on the chip using a CH341a programmer but ... I actually don't know which "chip" on the motherboard to target 🤦♂️
So here I am to ask for help.
I opened the laptop and I found a chip that may be the target, on it I've:
Winbond 25R256...2 Photos-
Channel: BIOS Requests ONLY!
-
-
by Popel1083Hi,
I want to remove the Bios Password of my Lenovo IdeaPad U330p with the Lenovo autopatcher. I have the CH341A Black and I'm using NeoProgrammer. The Programmer has an LED that indecates when it reads or writes the Chip. When I try to Connect my Programmer to the Bios Chip (Winbond 25Q64FVSIQ) the LED lights up even though I didn't click on Detect botton in NeoProgrammer. If i click on Detect the LED still remains on and NeoProgrammer says "IC not responding".
SN: QB08570065
MB: DA0LZ5MB8D0; REV: D; MODEL J31/N02-
Channel: BIOS Requests ONLY!
-
- Loading...
- No more items.
Comment