DELL 15 3505 LA-K001P PD1 - Identification Needed

[Ado02]

Hi,

Can anyone help me identify the PD1 component on LA-K001P motherboard?

[stj]

Re: DELL 15 3505 LA-K001P PD1 - Identification Needed

probably a diode - what does it say on it?

[Ado02]

Re: DELL 15 3505 LA-K001P PD1 - Identification Needed

It's damaged so, I can't see. Any ideas?

[mon2]

Re: DELL 15 3505 LA-K001P PD1 - Identification Needed

Unable to locate schematics for this Dell board.

In checking OTHER Inspiron schematics - found the attached for PD1. It is very possible that this is the same component as yours.

Review if the common ANODE (pin # 1) is GROUND on your board.

p/n TVNST52302AB0 (SOT523 = looks the same size as on your board)

Dell (Foxconn) likese to use this exact component on many other logic boards they manufacture.

Datasheet is attached. It is a common part that can be replaced by many other vendors.

[SMDFlea]

Re: DELL 15 3505 LA-K001P PD1 - Identification Needed

It is very possible that this is the same component as yours.

Possible yes.I found a post at elvikom from someone trying to ID the same part https://www.elvikom.pl/post266471.html

[Ado02]

Re: DELL 15 3505 LA-K001P PD1 - Identification Needed

Unable to locate schematics for this Dell board.

In checking OTHER Inspiron schematics - found the attached for PD1. It is very possible that this is the same component as yours.

Review if the common ANODE (pin # 1) is GROUND on your board.

p/n TVNST52302AB0 (SOT523 = looks the same size as on your board)

Dell (Foxconn) likese to use this exact component on many other logic boards they manufacture.

Datasheet is attached. It is a common part that can be replaced by many other vendors.

Hi, thank you for your help. I just checked and pin 1 is connected to the ground.

[Comps&Cons]

Re: DELL 15 3505 LA-K001P PD1 - Identification Needed

Hi, way too late but...
https://cdn.badcaps-static.com/pdfs/...b391ee54d5.pdf

[ravenmx]

Re: DELL 15 3505 LA-K001P PD1 - Identification Needed

Unable to locate schematics for this Dell board.

In checking OTHER Inspiron schematics - found the attached for PD1. It is very possible that this is the same component as yours.

Review if the common ANODE (pin # 1) is GROUND on your board.

p/n TVNST52302AB0 (SOT523 = looks the same size as on your board)

Dell (Foxconn) likese to use this exact component on many other logic boards they manufacture.

Datasheet is attached. It is a common part that can be replaced by many other vendors.

TVNST52302AB0_SOT523-3 this works ok. thanks you