mackbook A2141 dowen in water

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • mo7_naf@yahoo.com
    New Member
    • Apr 2022
    • 1
    • ksa

    #1

    mackbook A2141 dowen in water

    hell ihave mackbook A2141 dowen in water ichange the keboard and the mouse pad but still not working

Related Topics

Collapse

  • abajor
    A2141 820-01700 Water Damage L8504 Damaged, U3100/U3200 power cycles UB300/UB400 5V .25A
    by abajor
    Like title says A2141 came in with Water Damage, customer desperately wants the data.

    The actual water ingress doesn't appear too bad it sat for a day but was very dusty internally. I have no idea why L8504 was arced there is no apparent moisture there or around the LVDS cable; however, the LVDS to screen screw studs had popped off at some point and somebody tried securing it with kapton tape.

    I had to create a micron wire pad jumper to reconnect the south side of the L8504 since the primary pad was blasted down to the vias.

    That said after cleaning up the...
    12-21-2024, 07:16 PM
  • sam_sam_sam
    20 year old Kenmore refrigerator ice maker bad water valve coil took a crap
    by sam_sam_sam
    I got lucky that when I got home and was about to get some ice out of the ice dispenser I hear and see water running down the outside of the ice dispenser what the heck is going on here

    At first I thought that the ice dispenser mold was cracked so I brought a new ice maker because this one has been in there for about 10 years now

    Well I put the new one in and wait and I wait for the water valve to open and let water in no such luck well there is a way to check the function of the motor and the water valve on this ice maker just need a jumper wire “L” to...
    04-09-2023, 08:04 PM
  • edugimeno
    Stagg sms12p audio amp has water damage
    by edugimeno
    Hi! My friend just brought this audio amplifier/speaker fro his music band saying they realized its got no sound. Led powers up but there no sound at all
    I opened it and found 3 board. 2 of them are for input plugs and potentiometers, and the other larger board has the amplifiers for 2 large speakers that it drives
    There's also a large toroid transformer that feeds a lower voltage to the first 2 boards and a larger voltaje (36x2 rectified close to 100v) to the power board. The power board has the plugs for both speakers
    There is only one signal wire connecting the first boards...
    05-24-2025, 06:00 AM
  • RetroComputingGrotto
    Water Damaged Toshiba 48L1435DB
    by RetroComputingGrotto
    I have a water damaged Toshiba TV that was hanging nicely on the wall then over the summer we had a new multi-million pound boiler system put in and right where this TV was hanging is a nice new pair of water pipes for the radiators...

    The TV hasnt been used for a fair few months but it was needed again the other day and needless to say, it didn't power on or show any signs of life (no standby LED etc). After checking the fuse in the plug (and that the socket it was plugged in to worked) I decided to get up some step ladders to take a closer look and low and behold! It looks like...
    10-07-2024, 08:23 AM
  • macabook
    A2141 issues after display replacement
    by macabook
    Hi everyone,
    I have replaced a broken display on A2141 with a good one, taken from similar model, now the image and backlight works fine. But the camera, the true tone and keyboard backlight is not working. I made some research on internet but I am still not sure how to fix it, according to logiwiki the A2141 display is compatible with all similar model but we need to use a1707 flex cable, so my questions are:
    1-does the cable will make every thing work fine ?
    2-Do we need to swap display IC chips from the old display to make everything work correctly,( I saw it on multiple video...
    12-26-2024, 02:20 PM
  • Loading...
  • No more items.
Working...