Asus x412fl question about bios chip

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Yosua
    Badcaps Veteran
    • Jun 2021
    • 221
    • Indonesia

    #1

    Asus x412fl question about bios chip

    Hi all colleagues, today I have a problem with my Asus x412fl rev 2.0 with the problem only turning on the power light when the adapter is connected, I tried to rewrite the bios ic, but when I delete it and I read it again to make sure the file has been deleted, it turns out there are still many codes that can't be erased and I've tried to delete them again but still can't clean, does that mean this bios ic is broken?
  • mon2
    Badcaps Legend
    • Dec 2019
    • 14198
    • Canada

    #2
    Re: Asus x412fl question about bios chip

    Post the full markings of the flash chip.

    Be sure your flash programmer can support the same voltage and part number.

    If yes then the fault could be the flash memory chip.

    Comment

    • Yosua
      Badcaps Veteran
      • Jun 2021
      • 221
      • Indonesia

      #3
      Re: Asus x412fl question about bios chip

      Originally posted by mon2
      Post the full markings of the flash chip.

      Be sure your flash programmer can support the same voltage and part number.

      If yes then the fault could be the flash memory chip.
      thankyou for your time sir.

      This GD25B127dsig code is on the bios ic and the voltage is the same 3v

      and i use ch431a programmer and bios ic is detected

      Comment

      • mon2
        Badcaps Legend
        • Dec 2019
        • 14198
        • Canada

        #4
        Re: Asus x412fl question about bios chip

        Can you confirm that this exact part is supported by your programmer software?

        Believe that the GD series is Gigadevice.

        If there is an option to slow down the communication, try that feature.

        When you try to erase the part, do you see the same results or different on each attempt?

        If you repeat the full chip erase, does the part erase?

        Try different programmer software and post your results. There are many for your hardware. If other programming apps also fail, then consider to replace the flash device.

        Comment

        • Yosua
          Badcaps Veteran
          • Jun 2021
          • 221
          • Indonesia

          #5
          Re: Asus x412fl question about bios chip

          Originally posted by mon2
          Can you confirm that this exact part is supported by your programmer software?

          Believe that the GD series is Gigadevice.

          If there is an option to slow down the communication, try that feature.

          When you try to erase the part, do you see the same results or different on each attempt?

          If you repeat the full chip erase, does the part erase?

          Try different programmer software and post your results. There are many for your hardware. If other programming apps also fail, then consider to replace the flash device.
          As far as I know, as long as I use this programmer it always works and there is no problem sir, even though flashing other gigadevice bios ICs also always works, and that's all I know.

          when there is a file left and I try to delete it again, and the file is deleted but only a little code is deleted, and when I try again it remains the same, i.e. deleted a little

          Comment

          Related Topics

          Collapse

          Working...