Replaced BIOS chip, lost 2 capacitors, got stuck with fan at 100% and cpu at minimum

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • elitebooker
    New Member
    • Sep 2021
    • 9
    • Bosna i Hercegovina
    #1

    Replaced BIOS chip, lost 2 capacitors, got stuck with fan at 100% and cpu at minimum

    Replaced BIOS chip, lost these 2 caps: https://www.badcaps.net/forum/showthread.php?t=102355
    Then after some time got 5 beeps at boot that left my fan at 100% and cpu at minimum clock. Ryzen 5 2500u. Any help?
    Tags: None
    Previous template Next

    Related Topics

    Collapse
    • DynaxSC
      ASRock B650M PRO RS - BIOS CHIP 25Q256JW BLOCKED BY STATUS REGISTERS
      by DynaxSC
      Hi

      I have a very strange issue with the BIOS SPI chip of an ASRock B650M PRO RS motherboard.
      The SPI chip is an Winbond 25Q256JWEQ model (1V8).
      The motherbaord doas not POST - it lits only CPU and DRAM EZ Debug Leds, and stays that way forever.
      The Flashback function of the motherbaord is also not working, despite all instructions followed correctly - I'm 100% sure of this.

      I have then desoldered the chip, backupped the contents, and tried to earease the chip in order to program stock image, but the chip is locked by status registers SREG2 (TB) and SREG6...
      08-04-2025, 12:20 PM
    • tranquility
      Onkyo TX-NR809 – no hdmi, DTS or NAND chip ? stuck at starting kernel
      by tranquility
      Hello,
      i want to repair an Onkyo TX-NR809 receiver.

      symptoms:
      on power on, display appears and i hear one click. enue functions is given.
      - no hdmi output
      - audio output not tested, but i think it is not there
      - usb sticks are not recognized

      if i read out the chips with display+standby button + tone+
      both dts show only ????

      chip is D830K013BZKB4

      things i have done:
      - reflow of the dts chip without taking off and reballing
      - changed the aluminium caps without the big one with 25v because i dont...
      08-25-2025, 01:04 AM
    • acedogblast
      Guide to transplant MEC1503 EC chip and EEPROM reprogamming for T14s gen 2 and X13 gen 2
      by acedogblast
      This is a guide that I am writing for helping others to replace their MEC1503 EC chip if it breaks (or to get around an inconvenient prompt to the BIOS). This forum has been extremely helpful to me so I would like to contribute to help others. I will tell you right now that this task is very difficult to do. You MUST have experience and tools to do precision micro-soldering, BGA reballing, trace repair, and general laptop repair skills.

      There are some specialty tools needed to do this task. The replacement MEC1503 chips can be acquired from Aliexpress. Do not buy the bare chips as...
      11-02-2024, 05:13 PM
    • flaviustech
      Lost a component near BIOS Chip, Lenovo x1 Cartbon 8th gen
      by flaviustech
      I tried to rewrite a bios chip, i unsoldered chip to put in autopatcher software.
      IT is x1 carbon 8th gen and bios chip is 25q256jveq.
      As you can see in image i marked where it was and i have a picture before i unsoldered. I do not know how to find the proper component was there, a rezistor or a cap?! I know it was grey/white and jumped from my tweezers.
      Looks like it goes to pin 3 and from what i see in datasheet of bios chip, it is data line....
      12-02-2025, 08:38 PM
    • SMDFlea
      Common SPI bios chip programming Questions and Answers
      by SMDFlea
      Common SPI bios chip programming Questions and Answers
      ----------------------------------------------------------

      Q: I have a bios request,i can`t post my backup as i can`t read from the chip.

      A: If you can`t read from it how do you expect to write to it ?.

      Q: Why is my bios chip unreadable ?.

      A: The programmer is faulty or has a worn or broken zif socket.

      The USB cable is frayed,connector pins worn or some other physical damage.

      Not enough amperage or voltage to power the programmer properly.

      Bad...
      09-02-2021, 04:40 PM
    • Loading...
    • No more items.
    Working...