Lost a component near BIOS Chip, Lenovo x1 Cartbon 8th gen

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • flaviustech
    Member
    • Jun 2025
    • 11
    • Romania

    #1

    Lost a component near BIOS Chip, Lenovo x1 Cartbon 8th gen

    I tried to rewrite a bios chip, i unsoldered chip to put in autopatcher software.
    IT is x1 carbon 8th gen and bios chip is 25q256jveq.
    As you can see in image i marked where it was and i have a picture before i unsoldered. I do not know how to find the proper component was there, a rezistor or a cap?! I know it was grey/white and jumped from my tweezers.
    Looks like it goes to pin 3 and from what i see in datasheet of bios chip, it is data line.
    Attached Files

    if you find these attachements useful please consider making a small donation to the site

  • reformatt
    Badcaps Legend
    • Feb 2020
    • 1555
    • Australia

    #2
    R8980 - 51 ohms 0201

    Comment

    • flaviustech
      Member
      • Jun 2025
      • 11
      • Romania

      #3
      Thanks, i put one 0204 and is working, but it was 0ohm resistor. It was white at bottom, the top was black. So, at least i find out it wasn't cap.

      Comment

      Related Topics

      Collapse

      Working...