Hp zbook 15 g4 motherboard problem

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • dj+pesa
    New Member
    • Jan 2010
    • 8
    #1

    Hp zbook 15 g4 motherboard problem

    Hello all. Can somebody help me with the name off that part please. I has a burnt mark and I can't read the name of that part. I attached some pictures with the board,the location of the part and the part itself. Thank you.
    Attached Files
    Tags: None
    • dj+pesa
      New Member
      • Jan 2010
      • 8
      #2
      Re: Hp zbook 15 g4 motherboard problem

      Well,that part name is 397ma which is equivalent with NCT7718W or ADM1032ARMZ-2R. This can be closed. Thank you all. I hope that this information will be handful for someone.

        Comment

        Previous template Next

        Related Topics

        Collapse
        • iT0mT0m
          Problem with motherboard Gigabyte X570S Aero G - no detect RAM
          by iT0mT0m
          Hi,

          I have problem with detection RAM on this motherboard. When I install CPU(Ryzen 5 2600, 5 4500 or 5 5600G) DRAM Led is lighting all the time. I tried reflash various verion of bios using Q-Flash method and that not resolve my problem. I tried reflash bios by SVOD 4 but that not resolve problem too. All voltages is correct and I don't see any low resistance on coils and other elements on motherboard. I tried replace memory to other and nothing. I don't know where is a problem(maybe connections between cpu and rams socket?). Actually I have boardview for this motherboard and I have...
          12-23-2023, 12:17 PM
        • Xristakis795
          GA-P35-S3 gigabyte motherboard problem after upgrade
          by Xristakis795
          hi to all
          I have the above motherboard on which I had windows xp I upgraded it to windows 10 everything went well just when it rebooted and got updates i saw a message for a very short time that windows is trying to fix a problem they found and then the problem was overcome and all is well
          the computer works normally without any problems on the internet and in everything
          but I found out unfortunately when I had completely cut off the power supply from the network and I went the next morning and plugged it in to turn it on when it went to boot a black screen and the cpu was working...
          12-28-2021, 06:24 AM
        • hopkok
          Legion 5 PRO, 3 boards, same problem, NM-D562 Rev. 3.0 motherboard
          by hopkok
          Hi friends, last week I got 3 same boards for repair (NM-D562 Rev. 3.0), same problem, power button light up, but motherboard wont start.

          3,3V_alw and 5V_alw, 1,8V_alw and 0,75V_alw presented on all 3 boards, no other voltages. 1,2V missing and if I checked schematic right, I need 1,2V and than can be +3VS and +5VS generated after getting SUSP_N signal from KBC? or vise versa?

          I checked for low resistance on coils, no low resistance.

          Anyone with same issue like me?

          Thanks for any help.
          05-24-2025, 04:21 AM
        • vbogoev
          Lenovo S6000 won't turn on. Data recovery needed.
          by vbogoev
          Hello,

          Here I have the mentioned tablet with motherboard s6000-mb-h401. The tablet won't turn on, no display, charging normally. I manage to connect to UART port and got this output when I try to start it:

          Code:
          [PWRAP] pwrap_init_preloader
[PWRAP] pwrap_init
[PWRAP] _pwrap_init_sidly [Read Test] pass,SIDLY=0 rdata=5AA5
[PWRAP] _pwrap_init_sidly [Read Test] pass,SIDLY=1 rdata=5AA5
[PWRAP] _pwrap_init_sidly [Read Test] pass,SIDLY=2 rdata=5AA5
[PWRAP] _pwrap_init_sidly [Read Test] pass,SIDLY=3 rdata=5AA5
[PMIC_WRAP]wrap_init pass,the return
          ...
          06-20-2023, 06:36 AM
        • manosjkh
          Huawei motherboard part number DAH98MB38B0 missing part
          by manosjkh
          Hello everyone.
          In the attached photo of this Huawei motherboard I would appreciate if anyone of you knows the type of the IC in the red circle.
          Thank you very much in advance.
          ...
          03-10-2025, 03:27 AM
        • Loading...
        • No more items.
        Working...