On PR129, is K/F a unit of resistance for small values? Also, what does the "_4" mean? Thank you!!
Attached Files
-
-
Re: Schematics notation Q
"K" is for "kilo", here it's implied it is kiloohms for resistors.
"F" is a tolerance code, 1% in this case.
"4" is the package size, "0402" in this case. ("2" would be "0201")OpenBoardView — https://github.com/OpenBoardView/OpenBoardView -
Re: Schematics notation Q
thank you so much!Comment
-
I have been checking schematics for my motherboard and have difficulties to understand it. I figured that i need to replace the component designated with PQB03 on the board. In the schematics I find two entries with different components, although they have almost similar specs. I could not find an explanation for the prefixes "G1G3@" or "G2@"
Can somebody help me?
... -
Dear reader
I am performing a repair on a Sony ICF-SW55, which includes recapping (some) of the SMD capacitors on the mainboard. I am looking for verification of their values. At the moment, I'm 95% sure I've got the right values, but it is hard to find some official, credible or multiple independant sources on this.
At the moment, I have selected replacements based on the following list of values:
3 x 470uF 10VDC
3 x 4.7uF 35VDC
4 x 47uF 50VDC
8 x 22uF 6.3 VDC
1 x 220uF 6.3VDC
5 x 100uF 6.3VDC
Which... -
Dear Alls,
For sure it id a stupid question, but help me to understand. I am in a Dell 2007WFP revitalizing project - searching reason why not starting. Some resistors needed to replaced is is obvious. When I have soldered some resistors the measured (with multimeter) values were sometimes rather different written on them. I supposed these are wrong units so I desoldered and made a checking measurement and voilá the values is the same is written on. This happens only in case of a few resistors, most have the same values (+/- 10%) are written on it. "strange" SMD resistors =>103... -
Hello Everyone,
I will be really grateful if someone shares schematics and if possible the boardview of the old Asus Nexus 7 (2012) Tablet. The motherboard is ME370T Rev. 2.4. Now I can find schematics for the Rev. 1.0 but I could not find the schematics for the Rev 2.4. I tried to look for similarities in the Rev. 1 but there are somethings missing, plus the board i have has nearly no component names printed on it which as a newbie makes pretty hard for me to locate things. Any assistance will be appreciated. Thank you.
Comment