Re: HP Elitebook Folio 1040 g3 Capslock/Numlock 5 blinks
so you conform that MB 1040 G1 working Bord 5V regulator IC PG is 1.3V ?
is the 3/5 Regulator the same ? NB679AGD-Z?
after PL31 you have 6Caps check all of them most of the time PC200 cause fault
there is a way of by pass this only for test putting a jumper from pin 11 to 3 of PU16 PU24 pin5 to 13 or if you have DC regulate apply PG 1V 3A & see what are the SMD getting heat
Originally posted by classicandy
View Post
is the 3/5 Regulator the same ? NB679AGD-Z?
after PL31 you have 6Caps check all of them most of the time PC200 cause fault
there is a way of by pass this only for test putting a jumper from pin 11 to 3 of PU16 PU24 pin5 to 13 or if you have DC regulate apply PG 1V 3A & see what are the SMD getting heat
Comment