Most mosfet and power circuit to repair

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • killersoft
    Senior Member
    • Apr 2017
    • 75
    • algeria
    #1

    Most mosfet and power circuit to repair

    hello guys

    i want to buy some mosfet and power circuit from Aliexpress
    can somemone here give me the part list of the most mosfet and power circuit used in laptops repairing.

    thank you guys
    Tags: None
    Previous template Next

    Related Topics

    Collapse
    • Tynan Dill
      Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
      by Tynan Dill
      I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

      Upon bringing it home and plugging it up, it showed a standby light.

      I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

      The screen seems to blackout and stay black, but with a flashlight I can see the display.

      With my Playstation 4 connected via HDMI, and running a game I can hear sound.

      Assuming...
      ORIGINAL POWER SUPPLY BOARD
      7 Photos
      11-22-2024, 01:46 PM
    • PantherDave
      Microsoft Surface Pro (5th gen) model 1796 - no power
      by PantherDave
      Hi all!

      I'm trying to troubleshoot a Microsoft Surface Pro (5th gen) model 1796 that won't power on. Motherboard model is M1007506-015. My priority is retrieving data, but the SSD is integrated so it looks like if I can't repair it it'll need to go to a data recovery company. I've done a little basic board repair before, but nothing this advanced until now. So please forgive my ignorance in advance. 😅

      I found the boardview for this laptop in the forums here, and am able to open it on my PC with FlexBV.
      https://www.badcaps.net/forum/troubl...-hardware-devi...
      05-29-2024, 02:01 PM
    • sam_sam_sam
      Desoldering gun station modified to use a 18 volt @ 20 amp switching power supply
      by sam_sam_sam
      I have wanting to do this project for quite sometime now and I finally found a switching power supply that will work on this desoldering gun station ZD-915 that the original switching power supply took a shit and just was not worth trying to fix it because this switching power is not quite big enough to handle the heater element and the vacuum pump

      One note when I tested the switching power supply and the voltage control board I noticed that this desoldering gun heat up much faster than the original switching power supply which I was really surprised by to the point that I might buy...
      03-31-2024, 02:12 PM
    • Powderfanupnorf
      Dell AL440LX power on switch circuit help required
      by Powderfanupnorf
      Hi Everyone. First official post so fingers crossed I conform and also manage to get photos to work.

      So I am requesting some help from anyone who happens to have one of these motherboards to hand and perhaps a multimeter.

      My board has a single row of header pins for all the front panel stuff (have seen others where they are grouped together differently so thats no help) and the two pins for the power on switch had been previously repaired and I am trying to make a better repair. There looks to be pad and trace damage and im happy to relocate the header pin/pins to...
      13 Photos
      06-24-2024, 01:24 PM
    • vikivng
      guys..i need help with this lcd display used on ebikes pls.
      by vikivng
      This is an lcd display used on ebikes.
      long story short, there was condensation inside the unit.
      I opened it and thoroughly cleaned the pcb with isopryl.
      The board had no visible corosion.
      It powered on fine and was tested for an hour or so.
      However when connected to the bike,,it did not power on at all.
      I took it home and reopened it to take a look. There are no shorts based on MY testing.
      However,,when I probe the transistor and the mosfet gate in diode mode or contuinity mode, (one probe on transistor collector and one probe on mosfet gate}the unit...
      09-16-2025, 12:56 PM
    • Loading...
    • No more items.
    Working...