I'm not getting any voltage on PIN 5-8 of PQ11. If i jumper from PIN1 to PIN5 of pq11-system boots fine. So rest things are ok.
So B+ is shorted somewhere but i was unable to find what is wrong.
PR57/62/65 is ok. MOsfet at PQ10/11 and 12 is ok. I have replaced BQ24751a and checked all resistance near Charging ic.
Any ideas friends??
So B+ is shorted somewhere but i was unable to find what is wrong.
PR57/62/65 is ok. MOsfet at PQ10/11 and 12 is ok. I have replaced BQ24751a and checked all resistance near Charging ic.
Any ideas friends??
Comment