Hello, I have an Acer veriton n4670GT that, due to a fall to the ground, only started if I did a BIOS reset.
The power button ar ok, and when power off windows, then if press power button, this power on, but goes to boot loop, like press power button forever
It crossed my mind to try a BIOS update and when I finished it turned off and no longer starts in any way.
I have a flash programmer, but the file you download from the Acer website has a .CAP extension, it is not a .BIN
I have programmed it, but it still won't start, it is dead
Before programming the .CAP, I made a backup of its BIOS and hexadecimally speaking they are nothing alike
I don't know if anyone can have a .BIN of this Acer model or if they can tell me how to convert the .CAP into .BIN
This is the BIOS download for this model:
https://global-download.acer.com/GDFiles/BIOS/BIOS/BIOS_Acer_R01-B2_A_A.zip?acerid=637635716698093179&Step1=&Step2= &Step3=VERITON%20N4670GT&OS=ALL&LC=es&BC=ACER&S C=E MEA_11
Thank you
The power button ar ok, and when power off windows, then if press power button, this power on, but goes to boot loop, like press power button forever
It crossed my mind to try a BIOS update and when I finished it turned off and no longer starts in any way.
I have a flash programmer, but the file you download from the Acer website has a .CAP extension, it is not a .BIN
I have programmed it, but it still won't start, it is dead
Before programming the .CAP, I made a backup of its BIOS and hexadecimally speaking they are nothing alike
I don't know if anyone can have a .BIN of this Acer model or if they can tell me how to convert the .CAP into .BIN
This is the BIOS download for this model:
https://global-download.acer.com/GDFiles/BIOS/BIOS/BIOS_Acer_R01-B2_A_A.zip?acerid=637635716698093179&Step1=&Step2= &Step3=VERITON%20N4670GT&OS=ALL&LC=es&BC=ACER&S C=E MEA_11
Thank you