Another ux31 with a fan issue, but this time I could not solve with a clear ME.
The strange is:
with no lcd cable connected
FAN_PWM and FAN0_TACH change value
the fan speed goes from 0 to 50% of the maximum
with lcd connected
FAN_PWM and FAN0_TACH don't change value
the fan speed remain at max speed
This for me exclude a ITE problem , but what connection there is with the screen ?
The strange is:
with no lcd cable connected
FAN_PWM and FAN0_TACH change value
the fan speed goes from 0 to 50% of the maximum
with lcd connected
FAN_PWM and FAN0_TACH don't change value
the fan speed remain at max speed
This for me exclude a ITE problem , but what connection there is with the screen ?
Comment