Lenovo y50-70 will not turn on

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • rupertoos
    New Member
    • Jun 2017
    • 9
    • Poland
    #1

    Lenovo y50-70 will not turn on

    Hi there.

    I have a Lenovo y50-70 which will not turn on. When i connect the power brick and press the power button, white led will flash for a moment after releasing it. Nothing else.

    Power brick is genuine one from lenovo but it's rated for 2.25A instead of 6.75A. I do not have the correct one available at the moment.

    My bet is on the power brick itself but it's always better to ask.

    Thanks in advance.
    Tags: None
    • caspian
      Badcaps Legend
      • Oct 2015
      • 1589
      • Laptop
      #2
      Re: Lenovo y50-70 will not turn on

      first measure the output voltage of the power brick using multimeter.

        Comment

        Previous template Next

        Related Topics

        Collapse
        • pajdek
          Lenovo Y700-17ISK turn on and off
          by pajdek
          Hello, i have some issues with my laptop Lenovo Y700-17ISK (motherboard BY511 NM-A541), it started when i turn on the laptop, but the lcd wont turn on, i then connected it via hdmi to tv and screen was ok. So i thought maybe lcd stripe is faulty, i removed the bottom cover, disconnected main battery, reset the cmos by disconnecting battery for 1 min, then slighty move the lcd stripe. Conncted power supply and tuned on my laptop, the lcd turn on, it started to load os, then it turn off, after a second it turn on, then after like 3 seconds turn off again, and so on. Removed power supply, waited...
          09-20-2023, 02:49 AM
        • melvinvdb
          Lenovo y520-15ikbm most of the time doesn't turn on
          by melvinvdb
          Hello,

          I've repaired a few laptops in my life but this time my own laptop died😂.
          Funny enough this one is a bit tough on me.
          It doesn't turn on (most of the time).
          Model: Lenovo y520-15ikbm (NM-391).

          The only way to make it turn on is:
          1) unplug battery + charger + rtc (seems irrelevant)
          2) wait a minute
          3) plug battery/charger in
          4) on charger plugin, laptop turns on by itself. On battery plugin you have to press power button. Sometimes nothing happens and you have to try again.
          5) when it turns on it also displays POST...
          08-15-2024, 12:28 PM
        • g1150
          Lenovo G565 Laptop , LCD not turn on, external terminak ok.
          by g1150
          Lenovo G565 Laptop onboard LCD Display does not turn on.
          Only works with external Monitor.
          I am trying to verify that the LCD signals from the motherboard are ok.
          The LCD was working, but over time happened to not turn on more frequently.
          Now dead.
          Possibly the cable from MB to LCD is broken somewhere.

          I just wonder how it is detected if external or internal monitor shall be activated ?

          I found the following schematic on the net:


          Problem 2:
          The graphics chip ATI Mobility Radeon HD5470 seems defective.
          On Win7...
          05-07-2025, 11:51 AM
        • dqtech
          lenovo x240 nm-a091 wont turn on
          by dqtech
          i got this laptop with no power issue....i flashed the bios and laptop can turn on and use normally....but when i shut it down and rest for few minute (2-3 minutes), it wont turn on....i have to flash bios again...any idea what is the problem?...when i shutdown and suddenly press power button to turn on, it will turn on normally....problem happen when i rest the laptop 2-3 minutes after shutdown, it will not turn on....i need to flash bios again
          board number VIUX1 NM-A091 REV:1.0...
          02-07-2024, 01:57 AM
        • Patriarxis
          Lenovo IdeaPad 3 14ADA05 dosen't turn on
          by Patriarxis
          Hello.

          I have a Lenovo IdeaPad 3 14ADA05 that it dosen't turn on.

          It takes 0.027A and the power button flashing.

          All the voltages on the board are ok. 3.3, 5 etc.

          Also is charging the buttery .

          What else i can check?​
          05-26-2025, 01:03 AM
        • Loading...
        • No more items.
        Working...