Announcement

Collapse
No announcement yet.

Gateway laptop with power problem

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Gateway laptop with power problem

    please I urgently need help with this Gateway laptop I have here the model is SA1,when i plug in the charted to the power jack I don't get 3.3v under the power switch,I have tested
    PQ19
    PQ22
    PQ50
    PQ9
    but all looks OK, it's only PQ37 which gives me 19v at all pins and I don't know if it should be so,please anyone can help on what to test again,tnx in advance
    Mobo number is DA0SA1MB6E0 REV:E

    #2
    Re: Gateway laptop with power problem

    no help without schematic

    Comment


      #3
      Re: Gateway laptop with power problem

      please can anyone help me with the schematic?so that I can be helped

      Comment


        #4
        Re: Gateway laptop with power problem

        First link on Google man… https://cdn.badcaps-static.com/pdfs/...9a472ce0a2.pdf
        Attached Files
        OpenBoardView — https://github.com/OpenBoardView/OpenBoardView

        Comment


          #5
          Re: Gateway laptop with power problem

          PQ38 becomes hot when i put the charger in power jack,so I replaced it after which the board worked when I switch power on,but I realised when i remove the charger from the power jack and put it inn again i don't get the 3.3v under the switch and the laptop doesn't turn on when switch is pressed,really need help

          Comment


            #6
            Re: Gateway laptop with power problem

            Hi
            measure all pin U7 (connect adapter)

            Comment


              #7
              Re: Gateway laptop with power problem

              Originally posted by piernov View Post
              Many thanks Piernov
              Last edited by SMDFlea; 02-09-2021, 07:17 AM. Reason: google translate

              Comment


                #8
                Re: Gateway laptop with power problem

                Originally posted by emmanuelbill1988 View Post
                PQ38 becomes hot when i put the charger in power jack,so I replaced it after which the board worked when I switch power on,but I realised when i remove the charger from the power jack and put it inn again i don't get the 3.3v under the switch and the laptop doesn't turn on when switch is pressed,really need help
                Hi:
                I know this is years latter, but let me try my question:
                Did you resolve the issue? Which MOSFET(s) were responsible. Someone suggested U7, but that is a fan controller. Noting to do with issue at hand.
                Let me thank you in advance if you remember the details, and respond.

                Comment

                Working...
                X