Ecs elitegroup w341ui

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • String2016
    Badcaps Legend
    • Nov 2015
    • 2229
    • philippines

    #1

    Ecs elitegroup w341ui

    I have a problem with this laptop when I plugged in the charger blue light comes then shuts off but when I putt the battery it charges in and when I remove the battery and press power again blue light standby no cpu fan spinning. I already measure dc jack 19 volts is present I measured some of capcitors 3.3 and 5v are present but I notice the chip ATI IXP 460 is hot. please anyone can help me.Ive attached the image of ATI. thank you
    Attached Files
  • String2016
    Badcaps Legend
    • Nov 2015
    • 2229
    • philippines

    #2
    Re: Ecs elitegroup w341ui

    anyone please

    Comment

    • alihomee
      Badcaps Legend
      • Dec 2012
      • 1570
      • malaysia

      #3
      Re: Ecs elitegroup w341ui

      try post some details......when it gets hot after u switch on or only with plugin

      Comment

      • String2016
        Badcaps Legend
        • Nov 2015
        • 2229
        • philippines

        #4
        Re: Ecs elitegroup w341ui

        Thanks for the reply the chip gets hot when plugged in

        Comment

        • vienzen
          Senior Member
          • Feb 2015
          • 112
          • PHILIPPINES

          #5
          Re: Ecs elitegroup w341ui

          Did you solve your problem?

          Comment

          • emestee
            Badcaps Veteran
            • Dec 2019
            • 228
            • Bulgaria

            #6
            Re: Ecs elitegroup w341ui

            Please post the correct motherboard motherboard model. If you have a lab power supply, measure the current consumption in each state.

            Comment

            • vienzen
              Senior Member
              • Feb 2015
              • 112
              • PHILIPPINES

              #7
              Re: Ecs elitegroup w341ui

              no motherboard model written on the pcb

              Comment

              • emestee
                Badcaps Veteran
                • Dec 2019
                • 228
                • Bulgaria

                #8
                Re: Ecs elitegroup w341ui

                That is very unlikely. Examine it carefully on both sides, and look for stickers as well.

                Comment

                Related Topics

                Collapse

                • valente222
                  HP 14 LA-A993P REV 1.0, identify ic? and not susp# present
                  by valente222
                  I have a Mb LA-A993P REV 1.0 computer, I am guiding myself with these two shared boards. ;
                  there are some ICs that are not the same, in this case those of the PU1501 (JD4TB) and PUH1 (NF4SA) images.
                  n, please identify.

                  330mA of consumption after 8 seconds turns off. +3VALW AND +5VALW present, EC_RSMRST# , LID_SW# , EC_ON# , ACIN# present.


                  SUSP# NOT PRESENT, which would be this the problem does not turn on sub-sources Any leakage?

                  I also notice that in the PLH2 coil that belongs to +1.05VS according to the drawings I am not sure,
                  ...
                  06-27-2024, 06:11 PM
                • air_chair256
                  Lenovo Yoga 9I 15IMH5, MB LC40CM Won't Turn On, 1V_VCCGT is not present
                  by air_chair256
                  Hello,

                  I have a Lenovo MB LC40CM 19863-1 when press button is pushed the keyboard backlight turns on and off twice and the power button light keeps blinking and the fans spins for a few seconds and stops then again spins and stops (Three times) then laptop turns off. no image on screen. sometime when you leave it for few days it will turn on and work but once you restart it won't turn on.

                  Tried to reball RAM 1,2,3,4
                  Checked all voltages on big coils all present except 1V_VCCGT is not present I get 0V on this rail. is this voltage should be present once power button...
                  02-13-2024, 06:00 AM
                • javieromex
                  Dell G15 5511 LA-K452P won't turn on
                  by javieromex
                  Hello, any help will be apprecited!
                  • Model: Dell G15 5511
                  • MB: LA-K452P
                  • Issue: Won't turn on at all, no leds, no keyboard light, no fan spin, nothing happens when pressing power button. NOTHING.
                  • Customer reported it was turned off and left plugged in during the night and thats it...
                  • No signs of liquid damage or burned components.
                  Link to Schematics -> https://www.badcaps.net/forum/troubl...la-k452p-gdp50

                  I have checked so far:

                  ...
                  04-17-2025, 12:44 PM
                • Prott
                  Surface Pro 7 - SLP_S4 present, then gone
                  by Prott
                  Hello fellow Badcappers,
                  I have a problem with stubborn Surface Pro 7. I narowed it down to disappearing SLP_S4# (gone after around 200 ms).

                  Everything else works as it should (the whole power on sequence succesfully finishes, all the voltages are present) until this signal goes missing - with it missing the AND gate causes ALL_SYS_PWRGD to go back low and this makes VCCIN drop to 0 V as well. Interestingly the SLP_S4_DRV# signal from SAM is still present for a second, even after SLP_S4 is no longer there. I wonder what could either cause PCH to stop sending the signal or what...
                  12-03-2023, 06:11 PM
                • lapfix
                  Lenovo IdeaPad 3 NM-C961.no display
                  by lapfix
                  Hello everyone.
                  lap and motherboard : IdeaPad 3-15IGL05 Laptop - Type 81WQ
                  NM-C961.
                  Behaviour : connect charger it power on automatically ,reach 0.170 amp than down to 0.74 amp...no display.
                  with battery connected it reach 980 amp than 870 ...no display
                  No short ; no corrision no intervention before.
                  Try 2 differents bios versions same behaviour.

                  Some measuremets :
                  PL 1600 = 5valw present
                  pl 1100 = 3 vlalw present
                  pl 100 = 0.221 v without battery and when battery connected 7.8 volt
                  pl 6602 = 1.2 v
                  pl 6603 = 1.056v...
                  05-29-2025, 05:01 AM
                • Loading...
                • No more items.
                Working...