Hello everyone,
I have a HP Touchsmart 600-1155 All-In-One computer ( http://support.hp.com/us-en/document/c02059296 ) and recently has started to power off by himself (like long pressing on power button) every 2 hours 1 minute and few seconds (on the clock). I have never overclocked it and no drivers or devices was installed recently (os it`s out of scheme because it happens in bios too).
What i have tried so far:
• Checked temperatures (all ok)
• Checked voltages (all ok)
• Ran hp diagnostics (a tool that can be started at boot)
• Reset cmos
• Checked windows logs (nothing relevant. also OS is not relevant because it happens even in bios).
• Replace thermal paste on CPU and Video
• Checked all fans/coolers
• Reseat various components like hdd, dvd, minicards etc. (read somewhere that this action can do magic sometimes
)
Also i cannot run memtest properly because the 2 hours timeframe but the hp tool says there is no problem.
I cannot explain why 2h 1 minute every time... even if i power it on immediately and do a stress test on it. Is there any component doing something every 2h:1m ?
Also when i try to restart (from operating system) it enters the cycle but it hangs somewhere before the POST screen. I have to power off from button and start it again.
If you have an idea i am open to test it
Thanks,
Severs
I have a HP Touchsmart 600-1155 All-In-One computer ( http://support.hp.com/us-en/document/c02059296 ) and recently has started to power off by himself (like long pressing on power button) every 2 hours 1 minute and few seconds (on the clock). I have never overclocked it and no drivers or devices was installed recently (os it`s out of scheme because it happens in bios too).
What i have tried so far:
• Checked temperatures (all ok)
• Checked voltages (all ok)
• Ran hp diagnostics (a tool that can be started at boot)
• Reset cmos
• Checked windows logs (nothing relevant. also OS is not relevant because it happens even in bios).
• Replace thermal paste on CPU and Video
• Checked all fans/coolers
• Reseat various components like hdd, dvd, minicards etc. (read somewhere that this action can do magic sometimes
)Also i cannot run memtest properly because the 2 hours timeframe but the hp tool says there is no problem.
I cannot explain why 2h 1 minute every time... even if i power it on immediately and do a stress test on it. Is there any component doing something every 2h:1m ?
Also when i try to restart (from operating system) it enters the cycle but it hangs somewhere before the POST screen. I have to power off from button and start it again.
If you have an idea i am open to test it
Thanks,
Severs
Comment