Asus K43U short

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • penhitam
    Member
    • Dec 2014
    • 42
    • Malaysia

    #1

    Asus K43U short

    hi..i receive motherboard asus k43u, burn mofet .. i already remove burn mofet (PQ303) but the motherboard have short at coil PL303 leg 2 ..i remove PQ304, PC303, PR301, PR302 and last i remove PU301 but short still there.. Anybody pls advise. tq

    Attached Files
    Last edited by penhitam; 12-05-2015, 07:21 AM.
  • khaahk
    Badcaps Veteran
    • Dec 2013
    • 759
    • Estonia

    #2
    Re: Asus K43U short

    Something on 3.3 rail is shorted. Use lab PSU to find out what.

    Comment

    • penhitam
      Member
      • Dec 2014
      • 42
      • Malaysia

      #3
      Re: Asus K43U short

      Originally posted by khaahk
      Something on 3.3 rail is shorted. Use lab PSU to find out what.
      thank you for reply..already inject 2.9v at PL303 leg 2, but heat no show up...what maximum volt i can use ?

      sorry for bad english

      Comment

      • khaahk
        Badcaps Veteran
        • Dec 2013
        • 759
        • Estonia

        #4
        Re: Asus K43U short

        If you have short on a rail, then 2.9V is enough, it should be pulled low if limit amps.
        How many amps are drawn?
        KB930 or LAN card are the likely to be first ones to be shorted.

        Comment

        • penhitam
          Member
          • Dec 2014
          • 42
          • Malaysia

          #5
          Re: Asus K43U short

          Originally posted by khaahk
          If you have short on a rail, then 2.9V is enough, it should be pulled low if limit amps.
          How many amps are drawn?
          KB930 or LAN card are the likely to be first ones to be shorted.
          Lan chip (U49) also burn.. remove but short still there..

          Comment

          • khaahk
            Badcaps Veteran
            • Dec 2013
            • 759
            • Estonia

            #6
            Re: Asus K43U short

            If pq303 was shorted then you got 19V to 3.3V rail, most of this stuff is likely dead. Meaning chipset, ec, wifi, bios chip etc...

            Comment

            Related Topics

            Collapse

            Working...