Toshiba Z830 blown component identification

[grahamw01]

Hi guys,

I have a Toshiba Z830-10Q that is dead. The motherboard is an FALZSY1 A3162A. A component is blown near the power input, its 6 pins and the first few characters look like "ACC". By any chance is it a Maxim MAX1697UEUT? I just found an image on google that looks very similar.

Many thanks,
Graham

[khaahk]

Re: Toshiba Z830 blown component identification

Seems like pinout does not match for Maxim, though the top marking indicates it.
Pin 3 might be input, pin 4 output (is it connected to inductor?) or the opposite.
Determine by removing and see which voltage is present.
Pin 2 is GND? Pin 1 resistor divider to set the output voltage
Maybe some GMT product...

[sabyinluck]

Re: Toshiba Z830 blown component identification

i have same board but motherboard not on on /off 3.3v present please help any member

[G11NS]

Re: Toshiba Z830 blown component identification

Hi guys,

I have a Toshiba Z830-10Q that is dead. The motherboard is an FALZSY1 A3162A. A component is blown near the power input, its 6 pins and the first few characters look like "ACC". By any chance is it a Maxim MAX1697UEUT? I just found an image on google that looks very similar.

Many thanks,
Graham

Hi Bro, did your Toshiba mainboard fixed?
Cause I had same problem with you...
Anyone can help...?Pleaae..

[R_J]

Re: Toshiba Z830 blown component identification

Seems like it is a MAX1836EUT50
Pictures here https://www.ebay.co.uk/itm/2PCS-X-MA...-/332200311992

[G11NS]

Re: Toshiba Z830 blown component identification

Seems like it is a MAX1836EUT50
Pictures here https://www.ebay.co.uk/itm/2PCS-X-MA...-/332200311992

Thanks for information...