Hp Pavilion G6

[Ramee]

Hi guys, I need a little help here.
I removed one MOSFET from Hp g6 and my reading was 0.179v in Diode Mode between Source and Drain, is it good or bad?
This is N-Channel mosfet.

[rippergr]

Re: Hp Pavilion G6

You must check with multimeter in diode mode +probe to source and -probe to drain must show readings. If you switch the probes you must have infinitive. If you have readings in both sides then your mosfet is bad.

[Ramee]

Re: Hp Pavilion G6

Thanks for your reply.
I got reading on one side only, but i'm only got 0.179v, so i want know if it's good or bad.

[Ramee]

Re: Hp Pavilion G6

Can i use any N-channel mosfet, i could not find ME4812-G, i already checked on ebay?

Anyone can give me a tip.

Thanks in advance

[dj_ricoh]

Re: Hp Pavilion G6

yes! that`s a N-fet with schottky diode inside for protection!

if you wanna risc yourself go for it.