Need help programming 25LR512ME

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • quyet306
    Senior Member
    • Oct 2014
    • 69
    • saigon

    #1

    Need help programming 25LR512ME

    hello everyone
    i have board LA-N411P and bios chip 25LR512ME
    can i ask what is programer to read and write this bios
    many thank

Related Topics

Collapse

  • ahmedtou
    HOW CAN I UPDATE HL-DT-ST BD-RE GGW-H20N XA02
    by ahmedtou
    Hi everyone,
    help me please


    I have an HL-DT-ST BD-RE GGW-H20N with ROM version: XA02.




    When I tried to burn a 25GB Blu-ray disc using ImgBurn, I got an error.
    I will share all the details with you, including the disc information.




    Code:
    HL-DT-ST BD-RE  GGW-H20N XA02 (ATA)
    Current Profile: BD-R
    
    Disc Information:
    Status: Empty
    State of Last Session: Empty
    Erasable: No
    Free Sectors: 12,219,392
    Free Space: 25,025,314,816 bytes
    Free Time: 2715:27:17 (MM:SS:FF)
    Next
    ...
    08-27-2025, 08:49 AM
  • ChaosLegionnaire
    bug of the month: write caching setting for the hard drive in device manager
    by ChaosLegionnaire
    i recently bought a new wd re4 2tb with 2014 datecodes. when i got around to testing it tho in victoria hd tester, the write speed was very slow at 14 mb/s with a 256 sector transfer size. when i increased the transfer size to 1024 sectors, the write speed increased slightly to 44 mb/s. read speeds and sector verify speeds were fine and at normal speeds.

    so i just ass-u-med the drive's poor performance was due to it being an advanced format drive and i was using it on winxp. when i tried cloning my system disk to this wd re4 2tb drive and writing to it in linux, the write speed...
    10-06-2019, 01:39 PM
  • vbogoev
    Lenovo S6000 won't turn on. Data recovery needed.
    by vbogoev
    Hello,

    Here I have the mentioned tablet with motherboard s6000-mb-h401. The tablet won't turn on, no display, charging normally. I manage to connect to UART port and got this output when I try to start it:

    Code:
    [PWRAP] pwrap_init_preloader
    [PWRAP] pwrap_init
    [PWRAP] _pwrap_init_sidly [Read Test] pass,SIDLY=0 rdata=5AA5
    [PWRAP] _pwrap_init_sidly [Read Test] pass,SIDLY=1 rdata=5AA5
    [PWRAP] _pwrap_init_sidly [Read Test] pass,SIDLY=2 rdata=5AA5
    [PWRAP] _pwrap_init_sidly [Read Test] pass,SIDLY=3 rdata=5AA5
    [PMIC_WRAP]wrap_init pass,the return
    ...
    06-20-2023, 06:36 AM
  • alphabetty
    novice user attempting first BIOS write on ASUS laptop
    by alphabetty
    Hello first post!


    Ok so after an (ASUSTek) optional Windows update, my old ASUS E403NA laptop rebooted and froze in the BIOS menu screen and was unresponsive so after about 30 mins I powered off and back on again. Now i just get a power LED and a black screen, I have tried all the basic suggestions and all the suggestions on the ASUS site, spoke to ASUS support who said I will need to pay for an RMA.

    The laptop is worth €50 so I won't be doing the RMA at god knows what price.

    So I have seen some videos where people have reprogrammed the BIOS...
    03-07-2024, 08:31 AM
  • CapThatBrass
    RT809F Chip Write Failure - Winbond 25R256JV
    by CapThatBrass
    Hi,

    I've managed to take an image dump in BIN format of my Dell Latitude 5420, which had a Winbond 25R256JV chip installed.

    I used an RT809F programmer to obtain the BIN, using the supplied iFix RT809F programmer application (latest version being 20220830).

    The programmer automatically found the settings to read the chip but selected the Winbond W25Q256FV instead (my actual model isn't available on the listing within the software). The image came out fine - I did this multiple times to clarify the data being read was the same each time.

    ...
    10-04-2022, 11:56 AM
  • Loading...
  • No more items.
Working...