need to find RESISTOR values of mising LA-E831P

Collapse
X
Collapse
+ More Options
Posts
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • madushanka 1234
    Senior Member
    • Apr 2019
    • 55
    • sri lanka
    #1

    need to find RESISTOR values of mising LA-E831P

    need to find mising parts LA-E831P
    need to find values of this marked resistors...
    another shop mixed this marked 5 resistors...
    please check 3rd photo
    (rt3661b section/puz1)
    thank you
    3 Photos
    Tags: None
    Previous template Next

    Related Topics

    Collapse
    • Kobok
      Different (lower) resistor values on PCB?
      by Kobok
      Dear Alls,
      For sure it id a stupid question, but help me to understand. I am in a Dell 2007WFP revitalizing project - searching reason why not starting. Some resistors needed to replaced is is obvious. When I have soldered some resistors the measured (with multimeter) values were sometimes rather different written on them. I supposed these are wrong units so I desoldered and made a checking measurement and voilรก the values is the same is written on. This happens only in case of a few resistors, most have the same values (+/- 10%) are written on it. "strange" SMD resistors =>103...
      09-19-2022, 07:30 AM
    • vladprogressive
      HELP to find out the value of the resistor HP Elitebook 840 G10
      by vladprogressive
      Hello everyone, please help me find out the value of this resistor in the photo. Unfortunately, it flew away during desoldering, and pc don't power on without.
      It is located next to the EC BIOS on the Bottom of the motherboard Hp Elitebook 840 G10
      You can measure it directly with tester
      I can't find schematic and boardview for this laptop ๐Ÿ˜“

      Thank you!

      โ€‹
      Resistor value HP Elitebook 840 G10
      1 Photo
      07-25-2024, 10:29 AM
    • Crystaleyes
      Calculating resistor values in parallel with Caps
      by Crystaleyes
      Hi all.

      I recently picked up a dead car amplifier from the flea market, with the intention of learning some more in the area of audio repair.

      It has a stereo output with an added mono woofer output. The stereo channels are on one board, whilst the woofer section is on a separate board. There are also three large (ish) transformers.

      Apart from the fact that it was seriously dirty inside, it seems to be essentially complete with the only clearly damaged component being a toasted 1/4 watt resistor on the woofer board and it is this which I am wondering...
      05-21-2023, 07:35 PM
    • mikey5791
      Need help to replace burned resistor in 350w atx psu
      by mikey5791
      Hi to all forum members,

      Got this faulty 350 watt atx psu dirt cheap from a local online seller as i am keen to use it as a learning tool to repair faulty power supply.
      The faulty part is quite obvious from the burn area near the 16pin KA7500 BD pwm. The fuse is still intact with good continuity.

      Upon power on ac, there is 5vdc standby power on cathode of diode D14 and about 10vdc on cathode of diode D13.(This should be the aux power to generate the 12v and 5v rail.)
      Initially i replace the two burned resistors near my marked red arrow to 200 ohm resistor...
      12-26-2024, 04:55 AM
    • puretus
      ASUS B450-I Gaming mb resistor values
      by puretus
      Hi!,

      I'm missing two adjacent resistors what it seems to be USB Vbus detector line. New ones are easily soldered, however resistor values are mystery. Anyone knows or having similar mb on hand to check, thanks!

      A Pic included, resistor pair is upper right corner....
      01-16-2023, 03:56 AM
    • Loading...
    • No more items.
    Working...