Lenovo C340-14iml - Disable On Board Memory?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Sofian75
    Senior Member
    • Aug 2023
    • 84
    • France

    #1

    Lenovo C340-14iml - Disable On Board Memory?

    I had one blown memory chip (out of 4) the laptop would not work even with a ddr4 module.
    I had the on board memory disabled though a custom bios and the laptop was working fine, problem is as soon as the bios get updated I have to do it all over again.

    So I need your help on how to disabled the memory at the hardware level, I ve already removed the memory chips and the resistors/capacitors around them but it still won't work without the custom bios.
    What else do I need to remove?

    Schematics
    Attached Files
  • mcplslg123
    Badcaps Legend
    • Jun 2015
    • 7262
    • india

    #2
    Mb marking? Link schematic/bdv if posted in this forum.

    Comment

    • ktmmotocross
      Boardkiller
      • Feb 2014
      • 3553
      • slovakia

      #3
      Originally posted by Sofian75
      I had one blown memory chip (out of 4) the laptop would not work even with a ddr4 module.
      I had the on board memory disabled though a custom bios and the laptop was working fine, problem is as soon as the bios get updated I have to do it all over again.

      So I need your help on how to disabled the memory at the hardware level, I ve already removed the memory chips and the resistors/capacitors around them but it still won't work without the custom bios.
      What else do I need to remove?

      Schematics
      u can edit bios so windows wont update it
      Last edited by ktmmotocross; 11-29-2024, 11:15 PM.

      Comment

      • Sofian75
        Senior Member
        • Aug 2023
        • 84
        • France

        #4
        Originally posted by mcplslg123
        Mb marking? Link schematic/bdv if posted in this forum.
        There is the link to the schematics in my post, I could not find a boardview.

        Comment

        • Sofian75
          Senior Member
          • Aug 2023
          • 84
          • France

          #5
          Originally posted by ktmmotocross

          u can edit bios so windows wont update it
          As I said I would like to learn how to do it on the hardware level.

          Comment

          • ktmmotocross
            Boardkiller
            • Feb 2014
            • 3553
            • slovakia

            #6
            Originally posted by Sofian75

            As I said I would like to learn how to do it on the hardware level.
            so u need to find strap resistors. page 11

            Comment

            • mcplslg123
              Badcaps Legend
              • Jun 2015
              • 7262
              • india

              #7
              Useless even if you can figure it out with schematics without boardview. How on earth will you locate those resistors?

              Comment

              Related Topics

              Collapse

              Working...