After using the tool to enter the product name for my laptop, the Lenovo startup logo has been changed to a "Xiaoxin" logo.
How do I revert this back?
How do I revert this back?
-
Hello friends,
I've been racking my brain over the past few months on the following issue:
I have a Lenovo Ideapad 5 15ARE05 laptop that basically works fine as long it starts up at all.
If you shut it down, often you hear the HDD still spinning and the Power LED remains on, it only shuts down if you force it (pressing the power button for like 15 seconds).
Then, if you want to Switch it on, nothing happens, only the Power LED lights on, nothing else. If you leave it, then after like 30-60mins it turns on itself.
I tried all the common alleged „fixes“... -
Lenovo T480s
Model 20L8-S3TE00
Board ET481-U10
Chip MX25L12873F
Hi, I have a few of these & they came with a custom bios boot logo, no passwords etc.
2 x were brand new unused but with custom boot logo, 1 I installed Windows/ran updates then it bricked itself. 1 wouldn't get past the custom bios boot logo.
The third I loaded windows, took a backup of the bios chip, then tried to flash several different clean bios's via programmer which all caused it to not boot. I tried to reflash the original bios both using clip & desoldering but... -
Hi everyone,
I'm having an issue with my Lenovo ThinkPad P43s. The laptop does not power on when the internal battery is connected, but it works fine on AC power alone (battery disconnected). Once the battery is reconnected, the system becomes completely unresponsive — no lights, no fan spin, nothing.
Here's what I've tried so far:- Power/EC reset (held power button for 60 seconds with battery and AC disconnected)
- Booted successfully on AC power only with the battery disconnected
- Visual inspection of the battery — no swelling, burn marks, or connector damage
- Battery
-
Hi all,
I've encountered an issue I've never experienced before..
The Lenovo works perfectly, it has 4gb soldered ram and an additional slot. With just the 4gb the laptop passes all tests, everything is working. However no matter what frequency or capacity of ram I add to the extra slot the display starts artifacting completely randomly in both in the bios and in win and the only solution is to shut down.
I've inspected the pins of the extra slot with a magnifying and didn't notice anything unusual. I've also tried multiple ram modules, but the issue is the same.... -
HP DMI Tool is used to Extract DMI information from a HP BIOS Bin.
DISCLAIMER: badcaps.net and its members do not support unlocking stolen or company-owned devices.
The DMI Tool given here are for personal use only.
************************************************** ***********************************************
DISCLAIMER: THE HP DMI Tool IS FREE AND ARE INTENDED FOR EDUCATIONAL PURPOSES ONLY.
You CAN download it, use it.use it.I only ask that you DON'T modify it ,sell it or try to make a profit
from it, and that you please credit the author...