iPad Pro 12.9 (6th Gen) screen shuts off after unplugging device

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • SarcasticOP
    Wildly Mediocre
    • Oct 2023
    • 33
    • United States
    #1

    iPad Pro 12.9 (6th Gen) screen shuts off after unplugging device

    Greetings,

    I have an iPad Pro 12.9" 6th gen tablet that had a screen replaced about 10 months ago at a repair shop and last week the screen went blank during use. The device was still on, notifications played sound for example. I have replaced the screen twice, both screens are working until I unplug it, at which point I can see that screen is on but is all black. If I press the power button, the backlight goes off, and when I press it again, the image appears for half a second and then the screen goes back to being black but on. This issue is not present at all when the iPad is plugged in to power, but as soon as I unplug it, the issue presents itself immediately. Not even sure where I would begin to look for this or how to verify the issue. I would imagine a backlight driver but not sure how to test and verify.

    I really appreciate any help you can provide and thank you all in advance.
    Tags: 12.9, black, ipad, pro, screen
    Previous template Next

    Related Topics

    Collapse
    • ipatch
      ipad pro 9.7" blew a SMD component while replacing the screen 🤦‍♂️
      by ipatch
      i have an ipad pro 9.7" (1st gen) A1674 where i replaced the screen, but never attached the screen to the frame/chassis (glued down) due to the ipad being previously dropped so the new screen would never fit in the frame properly. so i need flex/bend the chassis to eventually fix the new screen in properly. so i temporarily just applied blue tape around the edges of the screen to keep it in place. when watching videos with the ipad the screen started flicker, so i though maybe the new quasi cheap amz screen i purchased was going out. so i disconnected then reconnected with power still on,...
      08-24-2024, 02:36 PM
    • GeirAndersen
      iPad .pcb file collection
      by GeirAndersen
      I tried searching the forum for whether this has been uploaded already, but couldn't find them (as a collection).
      Here's a dump of a bunch of iPads, I've split into 2 archives to get under file limit

      IPAD COLLECTION 1
      +---iPad mini1 820-3400(A1432) 820-3243(A1454?A1455)
      +---iPad mini2 820-3683(A1489) 820-3684(A1490?A1491)
      +---iPad mini3 820-00008(A1599) 820-00002(A1600)
      +---iPad mini4 820-00180(A1538) 820-00177(A1550)
      +---iPad mini5 820-01591(A2133) 820-01495(A2124?A2125?A2126)
      +---iPad Pro 12.9-4-820-01797(A2229) 820-01798(A2069?A2232?A2233)...
      12-09-2024, 09:28 AM
    • Ryan.man
      Macbook 2017 with touchbar (A1706) won't turn on after removing the screen
      by Ryan.man
      Hello everybody! Posting this in hopes somebody has some expertise that leads to a clear path of troubleshooting that saves me a lot of time!

      My macbook has the flex cable problem, the one that prevents the screen turning on. Ive been dealing with this for the last 3 years. Last year it went dead and I managed to fix it following youtube tutorials. But my fix wasnt the best, the problem returned a month later. This week, it went dead again. I again tried to fix it.

      This time the original cable broke too close to the screen, it can't be fixed without tearing the screen...
      02-04-2025, 12:23 PM
    • grimacelord
      Apple iPad Pro 3rd Generation 12.9" (A1876) No Power/Charge When Screen Is Connected
      by grimacelord
      Hello.

      Working on an Apple iPad Pro 3rd Generation 12.9" that has a weird issue. When the display is NOT connected, the iPad will charge and power on normally. I know it's on because I can hear notification sounds and the charging notification sound.

      If I connect a brand new display to the logic board, the iPad will not turn on at all. When I connect the iPad to an 18W wall charger and a USB-C ammeter, I can see that the iPad is attempting to charge, but constantly "resets" after just a moment or two.

      For example, when I connect the iPad to...
      04-15-2022, 11:06 AM
    • reformatt
      Macbook Air M2 A2681 Kernel panics after screen replacement
      by reformatt
      Just had a customer bring in a M2 MBA A2681 that had had a screen replacement in April at another repairer. Since then, she has been getting intermittent kernel panics. It's an aftermarket screen, and of course it fails in diagnostics as the calibration hasn't been done. The error in the panic log is "No device added after powering on the rails".

      It seems the original repairer has swapped the board and the screen to other MAC's, and said that it isn't a screen issue. From what I understand, by doing a quick search on Google, this is in fact a screen issue. The panic relates...
      07-31-2025, 08:37 PM
    • Loading...
    • No more items.
    Working...