hi there i have a macbook pro a1278 board 820-2936a no boot no dispaly only fan spin and green light. i seen some corroision on top starting to u4900 to u3890 i manage to clean it but still no luck to boot. i figure out that in pp15v t29 there is no available out voltage it shows only 0.6 volts only
a1278 820-2936a fan spin green light only help
Collapse
X
Related Topics
Collapse
-
i have a a1278 820-3115-b with no green light some measure volt
PPBUS_G3H=12v
PP3V42_G3H=3.43v
SMC_BC_ACOK=3v
SMC_BC_ACOK_VCC=3.4v
SYS_ONEWIRE=3.46v
ADAPTER_SENSE=3.42v
someone help i try with original charger -
by xalapamacHello, greetings everyone. I NEED YOUR HELP
I got this macbook that doesn't turn on, I don´t have a green light, but it's got a fan spin for a few minutes and after it's off.
This macbook comes in without damage from liquid spill.
The story of the Mac is that the screen closes and left without use for two days. Then they try to turn on and it won't turn on. Then they connect the charger and it doesn't give light.
It´s a Macbook Air 2017
Please help me understand how this works... Correct me if I'm wrong in my way of... -
by MOSSEPHi
Im hoping someone might be able to give me some idea of what may be wrong with my Monitor Audio RSW12 Sub.
Ive owned it since new in around 2002, so would really like to keep it running if I can, it was the first ‘decent' bit of audio equipment I ever purchased and is a little sentimental.
The issue I had was that it would power up with the red light, but sometimes the green light would not come on and I would get no bass from it. If the green light did come on though, I would get sound out of it.
I have already tried replacing all of the...-
Channel: Troubleshooting Audio Equipment
-
-
by MOSSEPHi
Im hoping someone might be able to give me some idea of what may be wrong with my Monitor Audio RSW12 Sub.
Ive owned it since new in around 2002, so would really like to keep it running if I can, it was the first ‘decent' bit of audio equipment I ever purchased and is a little sentimental.
The issue I had was that it would power up with the red light, but sometimes the green light would not come on and I would get no bass from it. If the green light did come on though, I would get sound out of it.
I have already tried replacing all of the... -
by lcdcaps1Hi
I have an 820-2610-A motherboard that has no green light.
I have noticed is when I do a SMC reset the light on the Magsafe blinks.
From My understanding, the sys onewire circuit is responsible for the green light on the magsafe
The sys onewire circuit on this model and others is more involved
I was hoping if anyone knows about this and how it works, can reply and let me know
I know this is an old model but I am sure there are people who still works on these or knows about them
I get 1.1v on the C7771 capacitor and will replace... - Loading...
- No more items.