Does anyone know the difference between the TPS65994AD and TPS65994AE?
And can be replaced AD with AE?
Thank you
And can be replaced AD with AE?
Thank you
-
-
The difference between them is the firmware https://e2e.ti.com/support/power-man...and-tps65994ae -
-
Hello everyone!
Recently I've noticed that some ShopJimmy backlight strips don't have double-sided tape installed upon them when an application calls for it, and I must purchase the tape separately. In a recent chat conversation with a customer service agent I told them if this tape wasn't applied when it was called for I would begin to consider ordering my backlight strips elsewhere. It looks like this time may have come.
I recently got a TCL 65S4 with bad backlights. After looking at the SJ listing here: https://www.shopjimmy.com/tcl-jl-d65...365as-m-led-ba...Yes0%1All backlight strips are the same quality0%1No0%0 -
They look the same to me. I was just wondering if there is a difference between these.
-
Hi, I have a ThinkPad E15 G4 I am working on for fun, the PD chip is not talking to the charger, it's stuck at 5v, I have replaced the PD chip three times now (new chips) and always the same result, I have checked for shorts, correct voltages on the PD IC etc - 5v 3v, and the 1.6v on the cc lines, even replaced the USB C port protector IC and the charging port,
The PD IC has a EEPROM connected directly, it's the one in the image attached, I assume the PD chip will not start without some initial commands stored in the EEPROM, the PD IC never shows in device manager, i backed up the... -
Hi all, I have a board LA-M053P with lost PD Type-c chip. I put TPS65994AD, board has 5V 300mA static and don't switch to 20V. Probably need TPS65994AE? Could someone confirm which chip should be?
Thanks. -
I am planning to buy myself a new mixer. Yamaha MG12U or XU(not sure) and I always like to take a look inside of mixer to check how it looks, if caps are low quality and other stuff.
I manage to find some teardown video on youtube but video name is saying MG12XU, but when you look at video on mixer it's MG12U.
And when I google those two models they have different PSUs one have cheap low quality caps, and other is way better with quality ones Nichicon. So I am confused now from what model exactly is that better PSU??
I google a little and found that there is this part number...
Comment