Toshiba L500 no power

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • dtonline
    Member
    • Apr 2014
    • 30
    • VietNam
    #1

    Toshiba L500 no power

    Hi, This laptop has no power can anyone help me to fix this
    i checked so far
    Q6002
    Drain=19V
    Source=0.03V
    Found Q6005 shorted drain to source
    i think this fet was faulty, question is does it internal fault by itself? if so do i need to check any other components connect to this? If replacement still no go
    what else do i need to check. Hope someone can guide me to solve this. Thanks
    Attached Files
    Tags: None
    • atsio
      Badcaps Veteran
      • Oct 2013
      • 819
      • Greece
      #2
      Re: Toshiba L500 no power

      Remove it and check if there are any shorts on any of its pads.

        Comment

        • Longmam
          Member
          • Nov 2014
          • 15
          • Canada
          #3
          Re: Toshiba L500 no power

          Check The U6000. Pin10 should be low and Pin14 is high.

            Comment

            Previous template Next

            Related Topics

            Collapse
            • Tynan Dill
              Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
              by Tynan Dill
              I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

              Upon bringing it home and plugging it up, it showed a standby light.

              I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

              The screen seems to blackout and stay black, but with a flashlight I can see the display.

              With my Playstation 4 connected via HDMI, and running a game I can hear sound.

              Assuming...
              ORIGINAL POWER SUPPLY BOARD
              7 Photos
              11-22-2024, 01:46 PM
            • PantherDave
              Microsoft Surface Pro (5th gen) model 1796 - no power
              by PantherDave
              Hi all!

              I'm trying to troubleshoot a Microsoft Surface Pro (5th gen) model 1796 that won't power on. Motherboard model is M1007506-015. My priority is retrieving data, but the SSD is integrated so it looks like if I can't repair it it'll need to go to a data recovery company. I've done a little basic board repair before, but nothing this advanced until now. So please forgive my ignorance in advance. 😅

              I found the boardview for this laptop in the forums here, and am able to open it on my PC with FlexBV.
              https://www.badcaps.net/forum/troubl...-hardware-devi...
              05-29-2024, 02:01 PM
            • GLISIT
              Asus Probook P5440UF-XB74 power issue
              by GLISIT
              Hi all,

              TL;DR - this laptop is driving me nuts with the oddball power-related behaviors. Appreciate any insight you can provide!


              I'm experiencing a power issue on an Asus Probook P5440UF-XB74. Although I've worked with electronics and computers for decades, this is my first attempt at getting into motherboard-level component troubleshooting. Any help the community can provide is greatly appreciated!

              A few weeks ago I was using the laptop (on battery power) for a Zoom meeting. The battery was running very low (long meeting) but I wasn't worried about...
              01-16-2025, 02:29 PM
            • sam_sam_sam
              Desoldering gun station modified to use a 18 volt @ 20 amp switching power supply
              by sam_sam_sam
              I have wanting to do this project for quite sometime now and I finally found a switching power supply that will work on this desoldering gun station ZD-915 that the original switching power supply took a shit and just was not worth trying to fix it because this switching power is not quite big enough to handle the heater element and the vacuum pump

              One note when I tested the switching power supply and the voltage control board I noticed that this desoldering gun heat up much faster than the original switching power supply which I was really surprised by to the point that I might buy...
              03-31-2024, 02:12 PM
            • ju123
              Toshiba Satellite C50-A won't power down
              by ju123
              Hi guys,

              So, I've been racking my brains on this one.

              I have a Satellite C50-A which I'm repairing for a friend.

              I recently replaced the main board due to failure.

              Following this, absolutely everything works perfectly, except for the fact it won't power down.

              Initially, shutting down via Windows would shut the OS down, screen would turn off (noticed the lighter black go to what looks like the darker black powered off screen as though the backlights have powered off), however the laptop was still running internally with a spinning...
              01-07-2022, 04:40 PM
            • Loading...
            • No more items.
            Working...