MacBook Pro 14 A2442 in test mode

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • siuras676
    Member
    • May 2018
    • 15
    • ireland
    #1

    MacBook Pro 14 A2442 in test mode

    Hi Everyone,
    I have machine here which is acting weird. I have attached link with video. It look like it is in test mode for screen.
    https://drive.google.com/file/d/1SpY...usp=share_link
    I have no idea how to get out from it , is someone here who have seen issue like this before.
    Thanks
    Tags: None
    • mon2
      Badcaps Legend
      • Dec 2019
      • 14659
      • Canada
      #2
      Wow. Never seen that before. Try a DFU.

        Comment

        • siuras676
          Member
          • May 2018
          • 15
          • ireland
          #3
          It is a screen failure in case someone will have issue like this..

            Comment

            Previous template Next

            Related Topics

            Collapse
            • lab10.haifa
              Macbook Pro A2338 820-02020 Stuck on RESTORE MODE
              by lab10.haifa
              Good day, friends. Got this problem with M1 macbook - it starts, chimes, tries to boot and stuck with a message "support.apple.com/mac/restore"
              It works with DFU mode, but it's cannot be restored. With "revive" function - same problem. Internal restore mode doesn't work, as well as Internet Recovery.
              There is no damage on the motherboard. No short circuits.
              Could it be a NAND problem? (but usually, if NAND is dead - mac simply wouldn't turn on)
              Thanks....
              10-08-2025, 02:55 AM
            • dbuergi
              Macbook A2442 no display board 820-02098
              by dbuergi
              Hi all,

              i got a Macbook A2442 which statrts normal but is not showing any picture. Using an external monitor works fine. After opening the Macbook i found a dried up line of liquid damage around CN979, RD503, and UP730. I cleaned up everything and also unsoldered the chips to clean the pads. There were no shorts before but i still don't have any picture. Sometimes you can see a glimpse of light in the middle of the display.
              So before i change the whole display i want to make sure that it's not any issue with the logicboard. So any ideas what i can check next?...
              05-25-2025, 10:58 AM
            • rathore4u
              Macbook Pro 2019 16" A2141 820-01700 stuk in DFU mode
              by rathore4u
              Hi all,

              I am trying to fix a T2 Macbook A2141 820-01700 board that's stuck in DFU mode.

              The SSDs have correct voltages

              PP2V5_NAND_SSD0 = 2.5V
              PP2V5_NAND_SSD1 = 2.5V

              PP0V9_SSD0 and PP0V9_SSD 1 = 0.9V

              PP1V8_SSD0 and PP1V8_SSD1 = 1.8V

              I can force the laptop to DFU mode using the SOC_FORCE_DFU using SWK003. Apple Configurator 2 tries to restore the Mac but it fails back to RECOVERY.

              Looking at the diagram here - https://repair.wiki/w/Apple_T2_platform Step 6, it says the problem could be loading from SSD,...
              02-23-2025, 09:16 AM
            • gurpawan
              A2442 14inch Macbook Pro ,JR940 Connector- where to buy?
              by gurpawan
              Hi, can anyone please advise on where to buy the JR940 microphone flex connector? I accidentally broke it while repairing A2442 14inch Macbook Pro 2021. it came off....
              10-22-2025, 02:40 PM
            • Constantinos
              Macbook Pro A2442 820-02098 No image but has backlight
              by Constantinos
              Hi all
              I have a Macbook Pro A2442 with the 820-02098 from a friend which has no picture on the display, however, the backlight works.
              He was streaming a football match on a questionable site, then the site crashed, and the problem emerged.
              Initially, he sent it to apple, who quoted him £1323.95 to replace the display, lid angle sensor and top case.
              Obviously, he decided against this and gave it to me so that I could have a crack at it.
              From initial diagnostics, I connected to an external monitor, I first tried with a HP 22W monitor, and I booted into the boot menu...
              08-24-2024, 09:48 AM
            • Loading...
            • No more items.
            Working...