Hi everyone,
i have this laptop it is completely dead.
V5WE2 LA-9531P
No 3.3 or 5v
VCC is ok 19v
PU401 blew up rails to coil and jumper PJ401
tried to replace IC but it has a burned pin underneath making IC unusuable
Short on PJ401
all other pins from the IC area seem ok
PJ401 = 2 oms
bought a buck converter from ebay
when soldering out + from buck converter to PJ401 and powering up :
The Coil from the buck converter is getting crazy hot and the CPU is getting slightly warm.
I cant check the whole board because i dont have a thermal camera.
I also dont have a Power Supplay to control the amps output rate.
(sorry for the bad english)
i have this laptop it is completely dead.
V5WE2 LA-9531P
No 3.3 or 5v
VCC is ok 19v
PU401 blew up rails to coil and jumper PJ401
tried to replace IC but it has a burned pin underneath making IC unusuable
Short on PJ401
all other pins from the IC area seem ok
PJ401 = 2 oms
bought a buck converter from ebay
when soldering out + from buck converter to PJ401 and powering up :
The Coil from the buck converter is getting crazy hot and the CPU is getting slightly warm.
I cant check the whole board because i dont have a thermal camera.
I also dont have a Power Supplay to control the amps output rate.
(sorry for the bad english)
Comment