Announcement

Collapse
No announcement yet.

Asus S510U no display (board X510UN)

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Asus S510U no display (board X510UN)

    Asus S510U no display (board X510UN)

    Replaced ram.
    Flashed bios.

    Same issue.No display.Any technical idea would be highly appreciated.
    No caps lock, Num lock lighting and no display to external monitor

    PL8901 - 12.67
    PL8701 - 5.142
    PL8702 - 3.392
    PL9301 - 1.371
    PL8101 - 0
    PL8102 - 0.871
    PL8103 - 0.871
    PL9103 - 0.917
    PL9101 - 0.916
    PL8302 - 1.072
    PL8601 - 1.233

    PLT_RST - 3.381
    PM_RSMRST - 3.306
    PM_RSMRST_PCH - 3.006
    DRAMRST - 0

    consumption with/without ram - 0.451

    [Mod. Edit] Boardview -> https://www.badcaps.net/forum/troubl...78#post1434578

    Reminder: rules and organization of this section
    https://www.badcaps.net/forum/troubl...f-this-section

    If you request/offer BIOS/schematics/boardviews, please post in the appropriate subsection, and you can link to it in the troubleshooting topic.
    Last edited by Vesko356; 02-21-2024, 11:06 AM. Reason: Attached boardview removed and replaced with link

    #2
    R0401-check for rating and voltage on both sides.

    If bios flashed is known good + me cleaned and R0401 is intact,you really cant do much other then staring at CPU fault.

    Comment


      #3
      Originally posted by mcplslg123 View Post
      R0401-check for rating and voltage on both sides.

      If bios flashed is known good + me cleaned and R0401 is intact,you really cant do much other then staring at CPU fault.
      R0401 pin 1 - 1.232v, pin 2 - 0v .... replace the resistor, same voltage...

      Comment

      Working...
      X